A Novel Approach for High Speed and Low Power 4-Bit Multiplier
نویسندگان
چکیده
A circuit design for a new high speed and Low Power 4-bit Braun Multiplier is presented. The multiplier is implemented by using different power reduction techniques. To design a multiplier it is necessary to design an AND gate and Full Adder circuit using the power reduction techniques is presented. The design uses CMOS digital circuits in order to reduce the power dissipation while maintaining computational throughput. This paper presents an accurate method of simulating the power dissipation, delay and power delay product, using different techniques in 250nm technology with supply voltage is 2.5v. The power dissipation of nearly 41% and delay 26% has been reduced by using modified proposed technique with good voltage swing levels.
منابع مشابه
Modified 32-Bit Shift-Add Multiplier Design for Low Power Application
Multiplication is a basic operation in any signal processing application. Multiplication is the most important one among the four arithmetic operations like addition, subtraction, and division. Multipliers are usually hardware intensive, and the main parameters of concern are high speed, low cost, and less VLSI area. The propagation time and power consumption in the multiplier are always high. ...
متن کاملDesign and Simulation of a 2GHz, 64×64 bit Arithmetic Logic Unit in 130nm CMOS Technology
The purpose of this paper is to design a 64×64 bit low power, low delay and high speed Arithmetic Logic Unit (ALU). Arithmetic Logic Unit performs arithmetic operation like addition, multiplication. Adders play important role in ALU. For designing adder, the combination of carry lookahead adder and carry select adder, also add-one circuit have been used to achieve high speed and low area. In mu...
متن کاملSymmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE)
Carbon nanotube field-effect transistors (CNFETs) are a promising candidate to replace conventional metal oxide field-effect transistors (MOSFETs) in the time to come. They have considerable characteristics such as low power consumption and high switching speed. Full adder cell is the main part of the most digital systems as it is building block of subtracter, multiplier, compressor, and other ...
متن کاملHigh speed Radix-4 Booth scheme in CNTFET technology for high performance parallel multipliers
A novel and robust scheme for radix-4 Booth scheme implemented in Carbon Nanotube Field-Effect Transistor (CNTFET) technology has been presented in this paper. The main advantage of the proposed scheme is its improved speed performance compared with previous designs. With the help of modifications applied to the encoder section using Pass Transistor Logic (PTL), the corresponding capacitances o...
متن کاملDesign and Implementation of a High Speed Systolic Serial Multiplier and Squarer for Long Unsigned Integer Using VHDL
A systolic serial multiplier for unsigned numbers is presented which operates without zero words inserted between successive data words, outputs the full product and has only one clock cycle latency. 
The multiplier is based on a modified serial/parallel scheme with two adjacent multiplier cells. Systolic concept is a well-known means of intensive computational task through replication of fu...
متن کامل