Approximate Error Analysis of Acoustic Passive Directing with Cross Array Based on Piezoelectric Transducers
نویسنده
چکیده
The four-element cross array is consisted of four piezoelectric transducers arranged in the form of cross. Passive directing with cross array is a very useful method for acoustic target detecting. This paper presented the algorithm of acoustic passive directing with cross array based on time delay estimation, and accurate formula and approximate formula for calculating the target’s direction were proposed. The extent of application for approximate formula was suggested through analyzing the approximate error. The paper provided a basis for choosing the appropriate size of four-element cross array in practical engineering application. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
Design Flexural Piezoelectric Acoustic Transducers Array Based d33 Mode Polarization
Received Jan 16, 2018 Revised Mar 18, 2018 Accepted Mar 31, 2018 Piezoelectric Acoustic Transducer (PAT) is a transducers used in many application such as medical diagnostic, medical ultrasonic imaging and underwater acoustic applications. Latest research, PAT were investigated in marine application and underwater acoustic imaging. Conventional PAT is design based on sensing element, Piezoelect...
متن کاملHigh Frequency and High Fill Factor Piezoelectric Micromachined Ultrasonic Transducers Based on Cavity Soi Wafers
This paper presents a high frequency and high fill factor piezoelectric micromachined ultrasonic transducer (PMUT) array, which is fabricated with a simple and CMOS compatible process based on commercially available cavity SOI wafers. This 2-mask process eliminates the need for through-wafer etching and enables 10× higher fill factor and thereby higher acoustic performance. PMUTs based on both ...
متن کاملSteel Bridge Fatigue Crack Detection with Piezoelectric Wafer Active Sensors
Piezoelectric wafer active sensors (PWAS) are well known for its dual capabilities in structural health monitoring, acting as either actuators or sensors. Due to the variety of deterioration sources and locations of bridge defects, there is currently no single method that can detect and address the potential sources globally. In our research, our use of the PWAS based sensing has the novelty of...
متن کاملPiezoelectric Wafer Active Sensors for Structural Health Monitoring of Composite Structures Using Tuned Guided Waves
Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) highfrequency modal sensing, i.e., the electro-mechanical (E=M) impedance method; and (c) passive detection (acoustic emission and impact...
متن کاملCompact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure
An effective wide band active control law through one kind of the Dynamic Vibration Absorber (DVA) is proposed and studied in this paper. With the help of mechanical impedance method, active DVA control law is formulated based on the passive mechanical model. The electrical DVA can generate multi-mode active damping to the structure. The host structure is an aluminum plate and acceleration sign...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014