Prediction of Incipient Damage Sites in Composites using Classifiers

This paper describes a method for predicting locations in a two-phase material where effective elastic strain is concentrated above a specified threshold value by virtue of the local arrangement of phases and a specified set of boundary conditions. This prediction is made entirely based on knowledge of the material properties of the phases, their spatial arrangement, and the boundary conditions, and does not require numerical solution of the equations of elasticity. The example problem is a 2D idealization of a fiberor particle-reinforced composite in which the fibers/particles are randomly placed in the matrix and the boundary conditions correspond to uniaxial extension. The method relies on a moving window implementation of a decision tree classifier that predicts, for all points in the material, whether the effective elastic strain will exceed a specified threshold value. The classifier operates on a set of attributes that are the coefficients of a series expansion of a discretized version of the phase geometry. The basis vectors appearing in this series expansion of the phase geometry are derived from a principal components analysis of a set of training samples for which the mechanical response is calculated using finite element analysis. These basis vectors allow the accurate representation of the phase geometry with many fewer parameters than is typical, and, because the training samples contain information regarding the mechanical response of the material, also allow prediction of the response using a classifier that takes a relatively small number of input attributes. The predictive classifier is tested on simulated two-phase material samples that are not part of the original training set, and correctly predicts whether efffective elastic strain will be elevated above a specified threshold with greater than 90% accuracy. International Journal of DAMAGE MECHANICS, Vol. 19—March 2010 233 1056-7895/10/02 0233–28 $10.00/0 DOI: 10.1177/1056789508096614 The Author(s), 2010. Reprints and permissions: http://www.sagepub.co.uk/journalsPermissions.nav *Author to whom correspondence should be addressed. E-mail: [email protected] Figures 1, 2, 8, 9 and 11 appear in color online: http://ijd.sagepub.com