Plasmonic dye-sensitized solar cells incorporated with Au-TiO₂ nanostructures with tailored configurations.

نویسندگان

  • Yoon Hee Jang
  • Yu Jin Jang
  • Saji Thomas Kochuveedu
  • Myunghwan Byun
  • Zhiqun Lin
  • Dong Ha Kim
چکیده

We developed plasmonic dye-sensitized solar cells (DSSCs) with tailor-designed Au-TiO₂ nanostructures integrated into the photoanode. Mutually antagonistic Au-TiO₂ core-shell structures supported on SiO₂ spheres (SiO₂@TiO₂@AuNP and SiO₂@AuNP@TiO₂) were prepared and incorporated as additives into the photoanodes of the DSSCs. The DSSCs employing the nanocrystalline-TiO₂ (nc-TiO₂)/SiO₂@TiO₂@AuNP and nc-TiO₂/SiO₂@AuNP@TiO2₂ as photoanodes showed remarkably enhanced power conversion efficiencies up to about 14% and 10%, respectively, with respect to a reference cell containing an nc-TiO₂/SiO₂@TiO₂ photoanode. This can be mainly attributed to the enhanced dye absorption by the intensified near-field effect of AuNPs and plasmon-enhanced photocurrent generation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Know thy nano neighbor. Plasmonic versus electron charging effects of metal nanoparticles in dye-sensitized solar cells.

Neighboring metal nanoparticles influence photovoltaic and photocatalytic behavior of semiconductor nanostructures either through Fermi level equilibration by accepting electrons or inducing localized surface plasmon effects. By employing SiO(2)- and TiO(2)-capped Au nanoparticles we have identified the mechanism with which the performance of dye-sensitized solar cells (DSSC) is influenced by t...

متن کامل

High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods

In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...

متن کامل

Fabrication of dye sensitized solar cells with a double layer photoanode

Dye sensitized solar cell was fabricated from a double layer photoanode. First, TiO2 nanoparticles  were synthesized by hydrothermal method. These TiO2 NPs were deposited on FTO glasses by electrophoretic deposition  method in applied voltage of 5 V and EPD time of 2.5-10 min. Then TiO2 hollow spheres (HSs) were synthesized by sacrificed template method with Carbon Spheres as template and TTIP ...

متن کامل

The investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell

Titanium dioxide-based nanofibers (TiO2 nanofiber) were prepared by an electrospinning technique. The electrospun composite fibers were synthesized at different concentrations of titanium isopropoxide (25.35, 50.69, 76.05 wt%) and calcinated at different temperatures (450 oC, 650 oC and 850 oC) for 2 h. The diameters of nanofibers decreased by increas...

متن کامل

Synthesis of TiO2 nanorods with a microwave assisted solvothermal method and their application as dye-sensitized solar cells

Inthiswork, Titanium dioxide (TiO2) nanostructures have beensynthesized via amicrowave assisted solvothermalmethod using titanium tetraisopropoxide (TTIP),polyvinylpyrrolidone(PVP) and Ascorbic Acid (AA) in ethanol. The mole ratio ofPVP/AA was found to be critical in determining the morphology and crystal phaseof the final product. PVP/AA mole ratio varied from 1 up to 1...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 6 3  شماره 

صفحات  -

تاریخ انتشار 2014