UV curable sulfonated hybrid materials and their performance as proton exchange membranes
نویسندگان
چکیده
In this study 2-acrylamido-2-methylpropanesulfonic acid (AMPS) containing UV curable nanocomposite membranes were prepared by using the sol–gel method. Tetraethylorthosilicate (TEOS), and 3-(methacryloyloxy)propyl trimethoxysilane (MAPTMS) were used, respectively as an inorganic precursor and coupling agent. Cross linking agents such as poly(ethylene glycol diacrylate) (PEGMA) and ethylene glycol dimethacrylate (EGDMA) were used to arrange the mechanical and physical properties of the resulting hybrid membrane. The hybrid formulation polymerized under UV irradiation and the gel percentage, water uptake of the membranes were calculated. The polymerization conversion of the organic part was investigated by using photo-differential scanning calorimetry (photo-DSC). The thermal and mechanical properties of the membranes indicated good stability. The morphological structure of membranes was investigated by scanning electron microscopy (SEM). In addition proton conductivity and methanol selectivity measurements were performed. The proton conductivity of the AMPS20–SOLGEL30 nanocomposite membrane is about 0.138 S cm 1 at 50 C. Selectivity toward methanol for the same membrane is very low with a selectivity factor of a = 0.032, which satisfies the requirements for DMFC applications. 2009 Elsevier Ltd. All rights reserved.
منابع مشابه
Synthesis of Sulfonated Polystyrene/acrylate–ionic Liquid (Si-SPS/A–IL) Hybrid Membranes for Methanol Fuel Cells
In this paper, the silicon-containing sulfonated polystyrene/acrylate–ionic liquid (Si-SPS/A–IL)hybrid membranes was prepared to obtain the proton exchange membrane (PEM) materials withhigh methanol barrier and good selectivity. The Si-SPS/A–IL hybrid membranes characterized asthe function of IL to evaluate their potential as PEMs in direct methanol fuel cells (DMFCs).Fourdifferent Hybrid mater...
متن کاملAn overview of organic/inorganic membranes based on sulfonated poly ether ether ketone for application in proton exchange membrane fuel cells
Nowadays, proton exchange membrane fuel cells (PEMFCs) are the most promising green energy conversion devices for portable and stationary applications. Traditionally, these devices were based onperfluoro-sulfonic acid electrolytes membranes, given the commercial name Nafion. Nafion is the mostused electrolyte membrane till now; because of its high electrochemical properties su...
متن کاملImproving the Proton Conductivity and Antibacterial Properties of Sulfonated Polybenzimidazole/ZnO/Cellulose with Surface Functionalized Cellulose/ZnO Bionanocomposites
New bionanocomposite proton exchange membranes were prepared from sulfonated polybenzimidazole (s-PBI) and various amounts of sulfonated ZnO/cellulose nanohybrids (ZnO/cellulose-SO3H). The use of ZnO/cellulose-SO3H compensates for the decrease in ion exchange capacity of membranes observed when non-sulfonated nano-fillers are utilized. The strong –SO3H/–SO<su...
متن کاملFunctionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review
Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...
متن کاملFabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells
A novel proton exchange membrane has been prepared using sulfonated poly(styrene-divinylbenzene) resin(SPSDR)–polyethylene(PE). The membrane is characterized by FT-IR, SEM and TGA/DSC. Water uptake, oxidative resistance, ionic conductivity and methanol permeability are measured to evaluate its performance in a direct methanol fuel cell. The on-set degradation temp...
متن کامل