Spot Weld Analysis with Two-Dimensional Ultrasonic Arrays
نویسندگان
چکیده
This paper describes a threefold method of testing the performance of an array-based ultrasonic tool for nondestructive testing of spot welds. The tool is described in its capabilities, use, and advantages over existing counterparts. Performance testing is not only described, but results from carrying out the testing are documented as well. The three performance testing methods include the use of calibrated samples, comparisons with actual spot-welds, and a performance evaluation of the embedded fitting software, which was carried out by a comparison of results with reference fits supplied by the National Institute of Standards and Technology.
منابع مشابه
Analysis of Bonding Strength of Ultrasonic Welding Process
In ultrasonic welding, high frequency vibrations are combined with pressure to join two materials together quickly and securely. Ultrasonic welding can join dissimilar metals in a split second, ultrasonic welding eases problematic assembly and this cost effective technique may be key to mass producing fuel efficient. In this work effect of various parameters on weld strength have been studied. ...
متن کاملDetermining mode-I cohesive parameters for nugget fracture in ultrasonic spot welds
Ultrasonic spot welds have been used as a model system to investigate how to determine the mode-I cohesive parameters associated with interfacial fracture of a spot weld. Numerical analyses indicated that, while multiple combinations of the two cohesive parameters (characteristic strength, σ̂ , and toughness, I ) could result in virtually indistinguishable behaviors for individual geometries, on...
متن کاملSpot Weld Analysis With 2D Ultrasonic Arrays
This paper describes a threefold method of testing the performance of an array-based ultrasonic tool for nondestructive testing of spot welds. The tool is described in its capabilities, use, and advantages over existing counterparts. Performance testing for and the results from carrying out the testing are described. The three performance testing methods include 1) the use of calibrated samples...
متن کاملEnhancing fatigue strength by Ultrasonic Impact Treatment for welded joints of offshore structures
This paper summarises fatigue tests on Y-joints to estimate the influence of a post weld treatment method called Ultrasonic Impact Treatment. With this method the fatigue resistance could be increased significantly. Furthermore, tubular joints of tripod structures for offshore wind energy converters are analysed with numerical simulations to judge these welded joints with the hot-spot-concept. ...
متن کاملUltrasonic Inspection of Pressure Vessel Construction Welds using Phased Arrays
Ultrasonic phased arrays are a new technology that offers considerable potential for inspecting construction welds. Using electronic control of the beam, phased arrays can scan, sweep, steer and focus the ultrasound. Since welds typically produce defects of known character and orientation, phased arrays can be programmed to optimize weld inspections. These inspections include standard ASME-type...
متن کامل