Performance analysis of generated hypoid gear based on measured tooth flank form data
نویسندگان
چکیده
Article history: Received 18 February 2013 Received in revised form 19 September 2013 Accepted 22 September 2013 Available online 24 October 2013 A method for predicting and analyzing the tooth contact pattern, vibration, and strength of a generated hypoid gear is needed to achieve a low-noise design and adequate quality control. However, it is not easy to analyze the performance of a generated hypoid gear because the tooth flank form is complicated and has a significant influence on the overall performance. In order to solve this problem, in this research, a method for analyzing one of the gear dynamics excitations and contact condition of a generated hypoid gear that considers the measured tooth flank form is proposed. The contact pattern and transmission error are measured experimentally and are compared with the analysis results. It is confirmed that the result from the proposed analysis method agrees with the experimental result. © 2013 Elsevier Ltd. All rights reserved.
منابع مشابه
Design and Manufacture of Spiral Bevel Gears with Reduced Transmission Errors
A method for the determination of the optimal polynomial functions for the conduction of machine-tool setting variations in pinion teeth finishing in order to reduce the transmission errors in spiral bevel gears is presented. Polynomial functions of order up to five are applied to conduct the variation of the cradle radial setting and of the cutting ratio in the process for pinion teeth generat...
متن کاملNew Modeling Methods of Spiral Bevel and Hypoid Gear Based On the CAD Surface Design Features
Based on the comprehensive analysis of previous research about the spiral bevel and hypoid gear, principle of forming spherical involute tooth surface was proposed with the spherical involute that was new theory applied in the field of their modeling. According to precise shape of tooth surfaces, each part of the quick and accurate derivations of the basic parametric equation of the tooth profi...
متن کاملPredicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملGear Optimization
In this study, an optimization methodology is presented to systematically define head-cutter geometry and machine tool settings to introduce optimal tooth modifications in spiral bevel and hypoid gears. The goal of the optimization is to simultaneously minimize the tooth contact pressure and the angular displacement error of the driven gear (the transmission error), to maximize the elastohydrod...
متن کاملMeshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کامل