Controlled Evaporative Assembly of Polymers from Confined Solutions

نویسنده

  • ZHIQUN LIN
چکیده

INTRODUCTION In the process of drying, nonvolatile solutes (e.g., polymers, proteins, viruses, bacteria, DNA, microspheres, nanocrystals, carbon nanotubes, etc.) contained within a sessile droplet (i.e., unconstrained liquid) readily assemble into a diverse range of intriguing oneor two-dimensional structures, possessing dimensions of a few hundred submicrons and beyond. It is, in principle, a nonequilibrium process. Two main characteristic patterns are often observed: ‘‘coffee rings’’ and irregular network structures (i.e., Benard cells). A ‘‘coffee ring’’ forms when, in the absence of natural convection and surface tension gradients, the contact line of an evaporating drop becomes pinned. This ensures that liquid evaporating from the edge is replenished by liquid from the interior, so the outward flow carries the nonvolatile dispersions to the edge. The evaporation flux varies spatially, with the highest flux observed at the edge of drop. A subset of the ‘‘coffee rings’’ phenomenon is the formation of concentric rings by repeated microscopic pinning and depinning events (i.e., ‘‘stick-slip’’ motion) of the three-phase contact line, that is, the competition between the friction force and surface tension of the solution. However, random concentric rings are generally formed. Moreover, based on Navier-Stokes equations with a lubrication approximation, the bulk of current theoretical work has centered on understanding a single ring formation using either analytical or numerical methods. By contrast, only a few elegant theoretical studies have focused, either analytically or numerically, on the formation of periodic multirings (i.e., concentric rings) during droplet evaporation on a substrate. A gradient of temperature normal to the droplet surface due to solvent evaporation can induce a Marangoni-Benard convection (i.e., closed-loop circular convection), which results in irregular Benard cells caused by the upward flow of lower, warmer liquid. The spatial variation of evaporative flux and possible convection mean, however, that these nonequilibrium, dissipative structures (e.g., ‘‘coffee rings,’’ cellular structures, fingering instabilities, etc.) are often irregular and stochastically organized.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Learning from "coffee rings": ordered structures enabled by controlled evaporative self-assembly.

Research into the evaporation of solutions is not only aimed at a better understanding the physics of evaporation, but increasingly at capitalizing on the extremely simple method it offers to assemble diverse nonvolatile solutes into complex ordered structures on the submicron and longer length scales. This Review highlights recent advances in evaporative assembly of confined solutions, focusin...

متن کامل

Controlled evaporative self-assembly of poly(acrylic acid) in a confined geometry for fabricating patterned polymer brushes.

A simple yet robust approach was exploited to fabricate large-scaled patterned polymer brushes by combining controlled evaporative self-assembly (CESA) in a confined geometry and self-initiated photografting and photopolymerization (SIPGP). Our method was carried out without any sophisticated instruments, free of lithography, overcoming current difficulties in fabricating polymer patterns by us...

متن کامل

Evaporative self-assembly of single-chain, polymeric nanoparticles.

Evaporative self-assembly of dilute solutions containing single-chain polymeric nanoparticles results in characteristic morphologies imaged using atomic force microscopy. Quantitative comparison of experimental data to morphologies obtained by lattice-gas simulations shows that the nonequilibrium patterns emerge from a complex interplay between dewetting, solvent evaporation and nanoparticle di...

متن کامل

Polyelectrolytes: Influence on Evaporative Self-Assembly of Particles and Assembly of Multilayers with Polymers, Nanoparticles and Carbon Nanotubes

Assembling polyelectrolyte multilayers in a bottom-up approach is reported for polymers, particles, nanoparticles, and carbon nanotubes. Effects of polyelectrolyte multilayers on evaporative self-assembly of particles, which are of interest to a number of applications including photonic crystals, films and substrates, are investigated. Polyelectrolyte multilayer coatings bring multifunctionalit...

متن کامل

Hierarchically ordered structures enabled by controlled evaporative self-assembly.

Hierarchical structures are common in both nature and technology. In the latter context, controlling the spatial arrangement of components over multiple length scales (i.e., forming hierarchically ordered structures) is highly desirable for many applications, such as lab-on-a-chip devices, integrated circuits, and microelectromechanical systems (MEMSs). [ 1 ] Most hierarchically ordered structu...

متن کامل

A simple route to hierarchically assembled micelles and inorganic nanoparticles.

Earning their stripes: A hierarchical assembly of micelles composed of an amphiphilic diblock copolymer, poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP), were made by combining controlled evaporative self-assembly of the confined PS-b-P4VP toluene solution in a cylinder-on-Si geometry with spontaneous self-assembly of micelles. This method gave microscopic stripes of nanometer-sized PS-b-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010