Separation of glass transition and crystallization in metallic glasses by temperature-modulated differential scanning calorimetry
نویسندگان
چکیده
The glass transition behaviour of the four metallic glasses La55Al25Ni20 , Zn65Mg35, and Nd60Fe30Al10 and Zr30Y30Al15Ni25 has been studied by temperature-modulated di erential scanning calorimetry (MDSC). It is clearly demonstrated that the glass transition can be separated from crystallization by MDSC. Two glass transitions have been observed for Zn65Mg35, Nd60Fe30Al10 and Zr30Y30Al15Ni25. Owing to the clearer observation of the glass transition, calculation of the reduced glass temperatures Trg (glass transition temperature divided by the melting point) can now be made with greater con® dence. §
منابع مشابه
Determination of the activation energy of crystallization based up on Ozawa and Kissinger formalisms and thermal stability of V2O5-NiO- TeO2 glasses by differential scanning calorimetry (DSC)
In the present research work, (60-x)V2O5-xNiO-40TeO2 amorphous bulk compositions with different molar percentages of 0≤x≤20 mol%, were prepared by well-known rapid melt-quenching method. Differential scanning calorimetry (DSC) at different heating rates (φ) was used to thermal analyze and to obtain more insight in to the thermal stability, glass forming tendency and so calorimetric characteris...
متن کاملHidden amorphous phase and reentrant supercooled liquid in Pd-Ni-P metallic glasses
An anomaly in differential scanning calorimetry has been reported in a number of metallic glass materials in which a broad exothermal peak was observed between the glass and crystallization temperatures. The mystery surrounding this calorimetric anomaly is epitomized by four decades long studies of Pd-Ni-P metallic glasses, arguably the best glass-forming alloys. Here we show, using a suite of ...
متن کاملOn the correlation between microscopic structural heterogeneity and embrittlement behavior in metallic glasses
In order to establish a relationship between microstructure and mechanical properties, we systematically annealed a Zr-based bulk metallic glass (BMG) at 100 ~ 300 °C and measured their mechanical and thermal properties. The as-cast BMG exhibits some ductility, while the increase of annealing temperature and time leads to the transition to a brittle behavior that can reach nearly-zero fracture ...
متن کاملMacroscopic phase separation of Se-rich (x < 1/3) ternary Agy(GexSe1−x)1−y glasses
Temperature modulated differential scanning calorimetry measurements on Agy(GexSe1−x )1−y glasses provide evidence for bimodal glass transition temperatures in Se-rich glasses (x < 1/3). At x = 0.20 and 0.25, thermal measurements performed as a function of Ag content in the 0 y 0.25 range reveal that the additive (Ag) segregates into an Ag2Se-rich glass phase, possessing a characteristic glass ...
متن کاملFormation of Ti-Zr-Cu-Ni bulk metallic glasses
Formation of bulk metallic glass in quaternary Ti-Zr-Cu-Ni alloys by relatively slow cooling from the melt is reported. Thick strips of metallic glass were obtained by the method of metal mold casting. The glass forming ability of the quaternary alloys exceeds that of binary or ternary alloys containing the same elements due to the complexity of the system. The best glass forming alloys such as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000