Printed Circuit Board EMI Source Mechanisms
نویسنده
چکیده
This tutorial paper reviews the basic mechanisms by which signal voltages and currents on a printed circuit board produce unintentional radiated emissions.
منابع مشابه
Expert System Algorithms for EMC Analysis
Expert system algorithms that analyze printed circuit board designs, anticipate EMC problems, and help designers to correct these problems are being developed by the EMI Expert System Consortium at the University of Missouri-Rolla. This paper reviews the basic structure of the EMI expert system and describes newly developed algorithms.
متن کاملControlling Power-Distribution-Plane Resonance in Multilayer Printed Circuit Boards
This paper describes the mechanisms of powerdistribution-plane resonance in multilayer printed circuit boards and the techniques to control the resonance. The powerdistribution-plane resonance is responsible for high-level emissions and circuit malfunctions. Controlling the resonance is an effective technique, so adequate characterization of the resonance is necessary to achieve control. The re...
متن کاملAN-690 Design Innovations Address Advanced CMOS Logic Noise Considerations
Noise in an electronic system can be described according to its source. The first category is system-generated noise, i.e., noise generated from the printed board up, such as power distribution and decoupling noise, crosstalk noise, electromagnetic interference (EMI), and transmission line reflections. System noise is a function of signal characteristics such as edge rate, voltage swing, and fr...
متن کاملEmi-emc Analysis of Printed Circuit Board Traces
This paper presents the Electromagnetic interference (EMI) and Electromagnetic compatibility (EMC) analysis of a Printed Circuit Board (PCB). The width of the differential pair trace of the PCB was varied and the emission values were measured and compared, demonstrating an improvement in radiated emissions when the width of the trace was decreased. The trace width of the PCB was increased from ...
متن کاملEMC’04/Sendai Control of Unintentional Electromagnetic Waves from Digital Circuits: Efficient EMC Modeling of Devices and PCBs
A research project has been carried out for the last five years, the subject of which is to develop effective methods to control electromagnetic noise radiation from digital electronic devices. Engineering approaches were chosen and some new modeling methods of electromagnetic phenomena around a printed circuit board are shortly described in relation to EMI subjects. Those results have been com...
متن کامل