Grey Relational Analysis and Its Application Based on the Angle Perspective in Time Series

نویسندگان

  • Guodong Xu
  • Peng Guo
  • Xuemei Li
  • Yingying Jia
چکیده

The research scope of grey relational analysis has not been developed in recent years, and the exiting GRA models are all based on three perspectives, including distance perspective, slope perspective, and area perspective. Under this situation, a novel model called grey relational analysis based on angle perspective (GRAAP) was developed in this paper for the first time, and this model can expand the research scope of GRA. Like other GRA models, GRAAP not only has the properties of symmetry, uniqueness, comparability, and so forth but also can be used to make predictions, assessments, classifications, and so on. Finally, this novel model was proved to be rational and effective through a comparative study on the similar degree of four time series.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dissimilar friction stir lap welding of Al-Mg to CuZn34: Application of grey relational analysis for optimizing process parameters

This study focused on the optimization of Al—Mg to CuZn34 friction stir lap welding (FSLW) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using Grey relational analysis (GRA). First, the degree of freedom was calculated for the system. Then, the experiments based on the target values and number of considered levels, corresponding orth...

متن کامل

Optimizing turning operation of St37 steel using grey relational analysis

Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...

متن کامل

Optimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis

Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...

متن کامل

Multi-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis

In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...

متن کامل

Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory

Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • J. Applied Mathematics

دوره 2014  شماره 

صفحات  -

تاریخ انتشار 2014