Effect of temperature on the sterilization of isopropyl alcohol by liquid propylene oxide.
نویسندگان
چکیده
Liquid propylene oxide added to a solution of isopropyl alcohol and incubated at different temperatures markedly reduced the time required to sterilize the alcohol solution.
منابع مشابه
Effect of Complexation Reaction Constant on the Separation of Propylene/Propane by Supported Liquid Membrane
Traditional systems for olefin/paraffin separation, like low-temperature distillation, are expensive and very energy consuming, and therefore, alternative separation methods are desired. Facilitated transport membranes are new tools for this separation to be substituted in large scale separation of olefin-paraffin mixtures. To design a membrane process for olefin-paraffin separation, equilibriu...
متن کاملThe study of humidity effect on carbon dioxide gas sensing properties of zinc oxide nanowires assisted by polyvinyl alcohol network at room temperature
In this research, Zinc oxide (ZnO) nanostructures were synthesized by low cost hydrothermal method. The grown ZnO nanostructures had a dispersed distribution with nanowire morphology and the specific surface area of about 7 m2.gr-1 which they have crystalized in hexagonal wurtzite structure. ZnO nanowires/polyvinyl alcohol network (ZP) on the epoxy glass substrate with cu-interdigited electrods...
متن کاملIsopropyl Alcohol Manufacture by the Strong-acid Process
Isopropyl alcohol has been called the first petrochemical (IARC, 1992). It can be prepared via three different methods: indirect hydration of propylene, direct hydration of propylene, and catalytic hydrogenation of acetone. Indirect hydration, also called the sulfuric-acid process, was the only method used to produce isopropanol worldwide until the first commercial direct-hydration process was ...
متن کاملPropylene oxide as sterilizing agent.
Liquid propylene oxide added to a variety of disinfectant solutions resulted in a significant reduction of the bacterial spore content of these solutions.
متن کاملEffect of temperature on wet agglomeration of crystals
Objective(s):This study dealt with the wet agglomeration process in which a small quantity of binder liquid was added into a suspension of crystals, directly in the stirring vessel where the crystallization took place. The purpose of this investigation was evaluation of the effect of temperature on the agglomeration process in order to gain insight into the mechanism of the formation of the agg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied microbiology
دوره 30 3 شماره
صفحات -
تاریخ انتشار 1975