Extraction of second harmonic from an InP based planar Gunn diode using diamond resonator for milli-metric wave frequencies

نویسندگان

  • Mohamed Ismaeel Maricar
  • Ata Khalid
چکیده

Planar Indium Gallium Arsenide (In0.57Ga0.47As) Gunn diode was fabricated on a semi-insulating indium phosphide substrate with on chip matching circuit to enable the extraction of second harmonic in millimeter and terahertz frequencies. The In0.57Ga0.47As planar Gunn diodes were designed with an active length of 4 lm, channel width of 120 lm and integrated with a novel diamond resonator to suppress the fundamental and extract the second harmonic. The experimental results gave good fundamental suppression and extraction of second harmonic (121.68 GHz) with an RF output power of 14.1 dBm. This is highest recorded power at the second harmonic from a planar Gunn diode. 2015 The Authors. Published by Elsevier Ltd. This is an openaccess article under the CCBY license (http:// creativecommons.org/licenses/by/4.0/).

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dry Etching Process in InP Gunn Device Technology Utilizing Inductively Coupled Plasma (ICP)

In this paper we report some recent progress in 77GHz InP Gunn device process development. Specifically, utilizing an advanced dry etching tool to define InP Gunn diode mesas. Unlike FeCl3-based photochemical etches, the Inductively Coupled Plasma (ICP) offers excellent sidewall anisotropy and uniformity, which provides improved process consistency to facilitate mass manufacturablity of millime...

متن کامل

To the memory of my beloved father

This work has as main objective the integration of planar Gunn diodes and high electron mobility transistors (HEMTs) on the same chip for the realisation of high-power oscillators in the millimeter-wave regime. By integrating the two devices, we can reinforce the high frequency oscillations generated by the diode using a transistor-based amplifier. The integration of the planar Gunn diode and t...

متن کامل

Improving the Quality Factor of the Coplanar Waveguide Resonator

A novel method of introducing a notch at a point of high magnetic field in a coplanar waveguide (cpw) radial and diamond stub resonator to increase the quality factor (Q) was analysed. For comparison both radial and diamond shaped cpw resonators with and without notches were fabricated on gallium arsenide (GaAs) semi-insulating substrate at the James Watt Nanofabrication Centre and tested in th...

متن کامل

Design of Photonic Crystal Polarization Splitter on InP Substrate

In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...

متن کامل

Second-harmonic generation and optical stabilization of a diode laser in an external ring resonator.

The second harmonic of the 842-nm output of a GaAlAs diode laser is generated in a KNbO(3) crystal in a resonant, external ring cavity. The diode laser is optically stabilized to the ring cavity through feedback from the counterpropagating fundamental wave, which is weakly excited in the resonator. We have produced 6.7 mW of tunable, narrowband radiation at 421 nm and have used that light to pe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015