Passive Wireless Strain and pH Sensing Using Carbon Nanotube-Gold Nanocomposite Thin Films

The recent development of wireless sensors for structural health monitoring has revealed their strong dependency on portable, limited battery supplies. Unlike current wireless sensors, passive radio frequency identification (RFID) systems based on inductive coupling can wirelessly receive power from a portable reader while transmitting collected data back. In this paper, preliminary results of a novel inductively coupled strain and corrosion sensor based upon material fabrication techniques from the nanotechnology field are presented. By varying polyelectrolyte species during a layer-by-layer fabrication process, carbon nanotube-polyelectrolyte multilayer thin film sensors sensitive to different mechanical (e.g. strain) and chemical (e.g. pH) stimuli can be produced. Validation studies conducted with different carbon nanotube thin films designed as either strain or pH sensors reveal high sensitivity and linear performance. When coupled with a copper inductive coil antenna, resulting RFID-based sensors exhibit wirelessly readable changes in resonant frequency and bandwidth. Furthermore, a carbon nanotube-gold nanocomposite thin film is fabricated and patterned into a highly conductive coil structure to realize a novel thin film inductive antenna. Preliminary results indicate that nanotube-gold nanocomposites exhibit resonance conditions, holding great promise for future RFID applications.