Growth and dislocation studies of β-HMX
نویسندگان
چکیده
BACKGROUND The defect structure of organic materials is important as it plays a major role in their crystal growth properties. It also can play a subcritical role in "hot-spot" detonation processes of energetics and one such energetic is cyclotetramethylene-tetranitramine, in the commonly used beta form (β-HMX). RESULTS The as-grown crystals grown by evaporation from acetone show prismatic, tabular and columnar habits, all with {011}, {110}, (010) and (101) faces. Etching on (010) surfaces revealed three different types of etch pits, two of which could be identified with either pure screw or pure edge dislocations, the third is shown to be an artifact of the twinning process that this material undergoes. Examination of the {011} and {110} surfaces show only one type of etch pit on each surface; however their natural asymmetry precludes the easy identification of their Burgers vector or dislocation type. Etching of cleaved {011} surfaces demonstrates that the etch pits can be associated with line dislocations. All dislocations appear randomly on the crystal surfaces and do not form alignments characteristic of mechanical deformation by dislocation slip. CONCLUSIONS Crystals of β-HMX grown from acetone show good morphological agreement with that predicted by modelling, with three distinct crystal habits observed depending upon the supersaturation of the growth solution. Prismatic habit was favoured at low supersaturation, while tabular and columnar crystals were predominant at higher super saturations. The twin plane in β-HMX was identified as a (101) reflection plane. The low plasticity of β-HMX is shown by the lack of etch pit alignments corresponding to mechanically induced dislocation arrays. On untwinned {010} faces, two types of dislocations exist, pure edge dislocations with b = [010] and pure screw dislocations with b = [010]. On twinned (010) faces, a third dislocation type exists and it is proposed that these pits are associated with pure screw dislocations with b = [010]. Graphical abstractEtch pits on the twinned (010) face of β-HMX.
منابع مشابه
اثر میکرو دانههای β-HMX بر کنترل مورفولوژی HMX خام تهیه شده از طریق فرایند نیتراسیون بکمن اصلاحشده
In the synthesis of hexamethylenetetranitramine (HMX) by Bachmann method, the morphology of crude HMX products are needle-like with alpha polymorph. This quality of materials leads to separation of α-HMX from final suspension to be time-consuming and difficult. On the other hands, crude product of α-HMX are the more sensitive and unsafe than β-HMX. Herein, a seeding strategy wa...
متن کاملMechanical properties of β-HMX
BACKGROUND For a full understanding of the mechanical properties of a material, it is essential to understand the defect structures and associated properties and microhardness indentation is a technique that can aid this understanding. RESULTS The Vickers hardness on (010), {011} and {110} faces lay in the range of 304-363 MPa. The Knoop Hardnesses on the same faces lay in the range 314-482 M...
متن کاملHmx Polymorphism: Virtual Melting Growth Mechanism, Cluster-to-cluster Nucleation Mechanism and Physically Based Kinetics
A fully physically-based thermodynamic and kinetic model of the β ↔ δ phase transformation in energetic crystal HMX crystal embedded in polymeric binder is developed. It is based on a new nucleation mechanism via melt mediated nano-cluster transformation and the recently formulated growth mechanism via internal stress-induced virtual melting. During the nucleation, nano-sized clusters of β phas...
متن کاملVibrational and thermodynamic properties of β-HMX: a first-principles investigation.
Thermodynamic properties of β-HMX crystal are investigated using the quasi-harmonic approximation and density functional theory within the local density approximation (LDA), generalized gradient approximation (GGA), and GGA + empirical van der Waals (vdW) correction. It is found that GGA well describes the thermal expansion coefficient and heat capacity but fails to produce correct bulk modulus...
متن کاملمطالعه حلالیت و کریستالیزاسیون تبخیری HMXدر حلال متیل اتیل کتون و اندازهگیری کمی تبدیل پلیمورفهای نوع در به روش پراش اشعه ایکس و طیفسنجی رامان
In this research, with evaluation of the solubility of cyclotetramethylene tetranitramine (HMX) explosive in different concentrations of water- methyl ethyl ketone (MEK) solvent, at a temperature range of 40-70 °C, some solubility and thermodynamic parameters such as enthalpy of dissolution and mixing were calculated. Thereafter, in order to increase the capacity of the crystallization process,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 8 شماره
صفحات -
تاریخ انتشار 2014