A Case Study of IR-Drop in Structured At-Speed Testing
نویسندگان
چکیده
At-speed test has become a requirement in IC technologies below 180 nm. Unfortunately, test mode switching activity and IR-drop present special challenges to the successful application of structural atspeed tests. In this paper we characterize these problems on commercial ASICs in order to understand how to implement more effective solutions.
منابع مشابه
Current Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors
In conventional direct torque control (DTC), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. The torque is then controlled by the y-axis component of stator voltage. In this scenario, the stator current does not exceed its permissible value. However, in the so-called optimal efficiency mode, the induction mot...
متن کاملCFD Simulations of Pressure Drop in KATAPAK-S Structured Packing
KATAPAK-S is a type of structured catalytic packing, which is used in reactive distillation processes. The dry pressure drop characteristic (the pressure drop in the absence of liquid flow) is of significant importance for the investigation of process hydrodynamics. In this paper, the dry pressure drop within the catalyst packed channels of KATAPAK-S has been investigated using Computational Fl...
متن کاملInvestigation of the Effect of DMOAP with Dimethyl Octadecyl Aminopropyl Group on TMOS Wettability Properties
In this study, organic-mineral hybrid silica coating was prepared by sol-gel process, in order to investigate the effect of Dimethyl octadecyl amin propyl group on TMOS wettability. The sol solutions were prepared at room temperature by hydrolysis and condensation of tetra methoxysilane (TMOS) diluted in methanol as solvent and in the presence of acetic acid as a catalyst and dimethylacetaldehy...
متن کاملCapacity Drop Estimation Based on Stochastic Approach Applied to Tehran-Karaj Freeway
Existence of capacity drop phenomenon, as the difference between pre-queue and queue discharge flow rates, has been one of the controversial concepts of traffic engineering. Several researches have focused on capacity drop existence and also its estimation issues. This paper aims to estimate capacity drop based not only on a comparison between breakdown and queue discharge flow rates, but also ...
متن کاملInvestigating and Mathematical Correlation of the Presence Effect of Solute and Surfactant on Mean Drop size in a Mixer-Settler
In this paper, the effects of several factors such as surfactant concentration, solute concentration, impeller speed and holdup on the mean drop diameter ( ) during emulsification have been studied in a single-stage mixer-settler extractor. A video technique has been developed in order to measure drop size distribution in the mixing chamber using a digital camera. The results show decreases wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003