Modulation doping and energy filtering as effective ways to improve the thermoelectric power factor

Thermoelectric (TE) materials have undergone revolutionary progress over the last 20 years. The thermoelectric figure of merit ZT, which quantifies the ability of a material to convert heat into electricity has more than doubled compared to traditional values of ZT ∼ 1, reaching values even beyond ZT ∼ 2 in some instances. These improvements are mostly attributed to drastic reductions of the thermal conductivity in nanostructured materials and nanocomposites. However, as thermal conductivities in these structures approach the amorphous limit, any further benefits to ZT must be achieved through the improvement of the thermoelectric power factor. In this work we review two of the most promising avenues to increase the power factor, namely (i) modulation doping and (ii) electron energy filtering, and present a computational framework for analysis of these mechanisms for two example cases: low-dimensional gated Si nanowires (electrostatically achieved doping), and superlattices (energy filtering over potential barriers). In the first case, we show that a material with high charge density, but free of ionized impurities, can provide up to a five-fold thermoelectric power factors increase compared to the power factor of the doped material, which highlights the benefits of modulation doping, or gating of materials. In the second case, we show that optimized construction of energy barriers within a superlattice material geometry can improve the power factor by up to∼ 30%. This paper is intended to be a review of ourmain findingswith regards to efforts to improve B Neophytos Neophytou [email protected] 1 School of Engineering, University of Warwick, Coventry CV4 7AL, UK 2 Institute for Microelectronics, Technical University of Vienna, Vienna, Austria the thermoelectric power factor through modulation doping and energy filtering.