Springback is very important factor to influence quality of sheet metal forming. Accurate prediction and controlling of springback is essential for the design of tools for sheet metal forming, many parameters
ثبت نشده
چکیده
منابع مشابه
Numerical and Experimental Investigations on Springback of U-bending of DP600 Steel Alloy Sheet
The most prominent feature of sheet material forming process is an elastic recovery phenomenon during unloading which leads to springback and side wall curl. Therefore evaluation of springback and side wall curl is mandatory for production of precise products. In this paper, the effects of some parameters such as friction coefficient, sheet thickness, yield strength of sheet and blank-holder fo...
متن کاملAn Experimental Study of Springback of Bent Sheet Metal Parts
Bending is the uniform straining of material around a straight axis and is used commonly in various sheet metal industrial products. Since all materials have a finite modulus of elasticity, plastic deformation is followed by some elastic recovery when the load is removed. In bending processes this phenomenon is called springback. Springback occurs not only in flat sheets or plate, but also in b...
متن کاملA Detailed Experimental Study and Evaluation of Springback under Stretch Bending Process
The design of multi stage deep drawing processes requires the evaluation of many process parameters such as the intermediate die geometry, the blank shape, the sheet thickness, the blank holder force, friction, lubrication etc..These process parameters have to be determined for the optimum forming conditions before the process design. In general sheet metal forming may involve stretching drawin...
متن کاملSimulation of Kinetic Friction in L-Bending of Sheet Metals
This paper aims at experimental and numerical investigation of springback behavior of sheet metals during Lbending process with emphasis on Stribeck-type friction modeling. The coefficient of friction in Stribeck curve depends on sliding velocity and contact pressure. The springback behavior of mild steel and aluminum alloy 6022-T4 sheets was studied experimentally and using numerical simulatio...
متن کاملSpringback Effect Prediction in Wipe Bending Process of Sheet Metal: a Ga-ann Approach
Sheet metal is one of the most important semi-finished products used in automobiles, domestic appliances, aircraft and other familiar products. Therefore sheet metal forming technology is an important engineering discipline in the area of mechanical engineering. In sheet metal forming, wipe bending process plays a major role in which the sheet metal tries to return to its original shape after r...
متن کامل