Validation of the Finite Element Method (fem) in Case of Reconditioning by Welding Applied to Crankshafts
نویسنده
چکیده
O. Chivu, C. Rontescu, D-T. Cicic, Polytechnic University of Bucharest, Romania This paper presents the results of the practical trials carried out based on the calculation assumptions considered within the FEM of the reconditioning by welding of a crankshaft used in the automotive industry. For the validation of the analytical model it was considered the influence of the crankshaft fixing possibility as well as the influence of preheating temperatures on the structure of the deposited zone.
منابع مشابه
Minimizing distortion caused by welding, by sequencing optimization in a large steel panel
Increasingly, Welding is used in industry for assembled various products, such as ships, cars, trains and bridges. Welding distortion often results such as lack of accuracy during assembly and will have increases manufacturing costs. So, predict and reduce welding distortion is very important to improve the quality of welded structures. In this study, firstly, a prediction method of welding di...
متن کاملMinimizing distortion caused by welding, by sequencing optimization in a large steel panel
Increasingly, Welding is used in industry for assembled various products, such as ships, cars, trains and bridges. Welding distortion often results such as lack of accuracy during assembly and will have increases manufacturing costs. So, predict and reduce welding distortion is very important to improve the quality of welded structures. In this study, firstly, a prediction method of welding di...
متن کاملSimulation and modeling of friction welding of stainless steel to aluminum alloy using finite element method and artificial neural network
Aluminum to stainless steel joints are broadly used in industries in order to reduce fuel consumption. While fusion welding is not a suitable method to join these metals. solid state welding, like friction welding (FW), is an effective way to this process. However, risk of intermetallic compounds (IMCs) formation is probable in these welds. In previews investigations formation of FeAl3, Fe2Al5 ...
متن کاملSimulation and modeling of friction welding of stainless steel to aluminum alloy using finite element method and artificial neural network
Aluminum to stainless steel joints are broadly used in industries in order to reduce fuel consumption. While fusion welding is not a suitable method to join these metals. solid state welding, like friction welding (FW), is an effective way to this process. However, risk of intermetallic compounds (IMCs) formation is probable in these welds. In previews investigations formation of FeAl3, Fe2Al5 ...
متن کاملFinite element simulation of microstructure evolution during friction stir welding of automotive aluminum parts
7000 series Aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. However, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so Friction stir welding (FSW) widely is used for welding this alloys. The process has been demonstrated to be effective and is c...
متن کامل