Low-noise solar-blind photodetectors based on LaAlO3 single crystal with transparent indium-tin-oxide electrode as detection window.

نویسندگان

  • Er-Jia Guo
  • Hui-Bin Lu
  • Meng He
  • Kui-Juan Jin
  • Guo-Zhen Yang
چکیده

The low-noise solar-blind photodetectors of indium-tin-oxide/LaAlO(3)/Ag (ITO/LAO/Ag) have been fabricated based on the properties of LAO bandgap excitation and the transparent conductance of ITO thin film. The ITO thin films are epitaxially grown on LAO wafers as the electrodes and detection windows of the photodetectors. The photodetectors have low noise and excellent electromagnetic shielding. The influence of the thickness of ITO thin films on the responsivity of the photodetectors has been studied. The photocurrent responsivity can reach 10.3 mA/W under the irradiation of 200-220 nm for a photodetector with 5 nm thick ITO film. The noise current is 1 pA order magnitude under the sunlight at midday. The experiment results suggest that ITO/LAO/Ag is one of the promising structures for the solar-blind deep-ultraviolet photodetectors.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells

The front transparent conductive oxide layer is a source of significant optical and electrical losses in silicon heterojunction solar cells because of the trade-off between free-carrier absorption and sheet resistance. We demonstrate that hydrogen-doped indium oxide (IO:H), which has an electron mobility of over 100 cm/V s, reduces these losses compared to traditional, low-mobility transparent ...

متن کامل

Graphene-Based Transparent Electrodes for Hybrid Solar Cells

*Correspondence: Qiaoliang Bao, Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Collaborative Innovation Center of Suzhou Nano Science and Technology, Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou 215123, China e-mail: [email protected], [email protected] The graphene-based transparent and conductive films were demonstrated ...

متن کامل

Fully printable transparent monolithic solid-state dye-sensitized solar cell with mesoscopic indium tin oxide counter electrode.

We present a new transparent monolithic mesoscopic solid-state dye-sensitized solar cell based on trilamellar films of mesoscopic TiO2 nanocrystalline photoanode, a ZrO2 insulating layer and an indium tin oxide counter electrode (ITO-CE), which were screen-printed layer by layer on a single substrate. When the thickness of the ITO-CE was optimized to 2.1 μm, this very simple and fully printable...

متن کامل

Recent Development in ITO-free Flexible Polymer Solar Cells

Polymer solar cells have shown good prospect for development due to their advantages of low-cost, light-weight, solution processable fabrication, and mechanical flexibility. Their compatibility with the industrial roll-to-roll manufacturing process makes it superior to other kind of solar cells. Normally, indium tin oxide (ITO) is adopted as the transparent electrode in polymer solar cells, whi...

متن کامل

Zn2– xSn1– xIn2 xO4 –d : An Indium-Substituted Spinel with Transparent Conducting Properties

Transparent conducting oxides (TCO’s) have widespread uses as electrodes in solar cells and liquid crystal displays and as heat-reflecting window coatings. The commercial TCO of choice is ITO (tin-doped indium oxide). ITO has a typical conductivity of 1!5]103 S/cm and a transparency 85—90% in thin films (1). In addition to ITO, which has been reviewed (2), a number of promising TCO’s consisting...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied optics

دوره 49 29  شماره 

صفحات  -

تاریخ انتشار 2010