Development of Recommendations on Building of the Lightweight Calculation Mathematical Models of the Axial Turbines of Gas Turbine Engines
نویسندگان
چکیده
The article contains the results of validation of the numerical computational models of the uncooled turbines of gas turbine plants created in the software suite NUMECA. The findings of the study of impact of the computational mesh dimension, account of the pre-path cavities on the design characteristics of turbines by modeling are represented in this article. As a result, there have been developed recommendations on building of the reliable computational models of the axial gas-turbine engines and the possibility of use in the optimization calculations of the turbine models without pre-path cavities without significant impact on its result has been substantiated.
منابع مشابه
A method of performance estimation for axial-flow turbines based on losses prediction
The main objective in this paper is creating a method for one-dimensional modeling of multi stage axial flow turbine. The calculation used in this technique is based on common thermodynamics and aerodynamics principles in a mean stream line analyses. In this approach, loss models have to be used to determine the entropy increase across each section in the turbine stage. Finally, the analysis an...
متن کاملOptimization the Efficiency of Gas Turbines for Air Pollution Reduction
Increasing concerns about energy and emissions from fuel consumption in gas turbines has attracted many researchers to protect the environment and reduce pollutants in the world. The main objective of this paper is to investigate the increasing efficiency of three-stroke gas turbine operation based on the technical analysis of the operation of three-axis gas turbine cycles with non-design condi...
متن کاملThermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier
Recently, many countries have paid substantial attention to power generation from biomass gasification, particularly through small-scale plants. A number of power plant models have been suggested and analyzed; however, certainly, desirable configurations have not been identified yet. Moreover, their performances are ordinarily difficult to compare, especially owing to the fact that working ...
متن کاملPerformance Prediction Modeling of Axial-Flow Compressor by Flow Equations
Design models of multi- stage, axial flow compressor are developed for gas turbine engines. Axial flow compressor is one of the most important parts of gas turbine units. Therefore, its design and performance prediction are very important. One-dimensional modeling is a simple, fast and accurate method for performance prediction of any type of compressors with different geometries. In this appro...
متن کاملModel-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines
In this paper, the multi-sensor fault diagnosis in the exhaust temperature sensors of a V94.2 heavy duty gas turbine is presented. A Laguerre network-based fuzzy modeling approach is presented to predict the output temperature of the gas turbine for sensor fault diagnosis. Due to the nonlinear dynamics of the gas turbine, in these models the Laguerre filter parts are related to the linear d...
متن کامل