2-D Realization of WiMAX Channel Interleaver for Efficient Hardware Implementation
نویسنده
چکیده
The direct implementation of interleaver functions in WiMAX is not hardware efficient due to presence of complex functions. Also the conventional method i.e. using memories for storing the permutation tables is silicon consuming. This work presents a 2-D transformation for WiMAX channel interleaver functions which reduces the overall hardware complexity to compute the interleaver addresses on the fly. A fully reconfigurable architecture for address generation in WiMAX channel interleaver is presented, which consume 1.1 k-gates in total. It can be configured for any block size and any modulation scheme in WiMAX. The presented architecture can run at a frequency of 200 MHz, thus fully supporting high bandwidth requirements for WiMAX. Keywords—Interleaver, deinterleaver, WiMAX, 802.16e.
منابع مشابه
Low Complexity Multi Mode Interleaver Core for WiMAX with Support for Convolutional Interleaving
A hardware efficient, multi mode, re-configurable architecture of interleaver/de-interleaver for multiple standards, like DVB, WiMAX and WLAN is presented. The interleavers consume a large part of silicon area when implemented by using conventional methods as they use memories to store permutation patterns. In addition, different types of interleavers in different standards cannot share the har...
متن کاملVHDL Implementation of Efficient Multimode Block Interleaver for WiMAX
Wireless communication is one of the most vibrant research areas in the communication field today. WLAN and WiMAX are emerging standards for wireless broadband communication system. OFDM is multiplexing technique used in above standards as it reduces inter symbol interference and multipath fading over wireless channel. Standards mentioned above can be implemented efficiently in FPGA. Interleave...
متن کاملAddress Generation Circuitry of WiMAX Deinterleaver using Xilinx FPGA
The paper reports the implementation of address generator of the 2-D deinterleaver used in wimax transreceiver system using FPGA. The bit streams in channel interleaver and deinterleaver for IEEE 802.16e standard associated with floor function is very difficult to implement on the FPGA kit. But by using this proposed algorithm eliminates the requirement of floor function and it also reduces the...
متن کاملMultimode Flex-Interleaver Core for Baseband Processor Platform
This paper presents a flexible interleaver architecture supporting multiple standards like WLAN, WiMAX, HSPA+, 3GPP-LTE, and DVB. Algorithmic level optimizations like 2D transformation and realization of recursive computation are applied, which appear to be the key to reach to an efficient hardware multiplexing among different interleaver implementations. The presented hardware enables the mapp...
متن کاملHardware Efficient WiMAX Deinterleaver Capable of Address Generation for Random Interleaving Depths
The variation in the prescribed modulation schemes and code rates for WiMAX interleaver design, as defined by IEEE 802.16 standard, demands a plethora of hardware if all the modulation schemes and code rates have to be unified into a single electronic device. Add to this the complexities involved with the algorithms and permutations of the WiMAX standard, invariably dependent on floor function ...
متن کامل