Reaction of Rat Subcutaneous Connective Tissue to Resin Composites Polymerized with Different Light Curing Units and Different Lightening Methods

نویسندگان

  • Atiyeh Feiz
  • Farahnaz Arbabzadeh Zavareh
  • Seyed Mohammad Razavi
  • Hamid Badrian
  • Sepideh Dolatyar
  • Mansoureh Vajihi
چکیده

The aim of the study was to determine and compare the reaction of rat subcutaneous connective tissue to resin composites polymerized with different lights curing and lightening methods. In this in vivo study, 20 mature Wister Albino rats were used. The composite discs, 4 mm in diameter and 2 mm thick, were cured by QTH or LED light curing units with 4 different lightning methods (full power QTH, full power LED, pulse LED, and ramp LED). Five resin composite discs were implanted in each rat, so that 4 of 5 discs for implantation of cured composite discs differently and central one as control without implantation. After sacrificing at 7, 14, 30, and 60 days the inflammatory grade, fibrosis, and necrosis were determined. Freedman and Cochran tests were used to analyze the data using SPSS software ver. 15. The results of the study showed significant differences in inflammation grade and fibrosis among control group and 4 experimental groups at day 14 (P < 0.05). In necrosis, there was no significant difference among 4 groups in different times (P > 0.05). In conclusion, neither the type of light curing units (LED or QTH) nor the lightening methods can affect the grade of inflammatory reaction.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hardness of composite resin polymerized with different light-curing units

Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...

متن کامل

Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units

Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. &nbsp;Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...

متن کامل

Mechanical properties of light-curing composites polymerized with different laboratory photo-curing units.

This study aimed to analyze the microhardness (KHN) and diametral tensile strength (DTS) of two hybrid resin composites (TPH Spectrum and Filtek Z250). To this end, the composites were polymerized with six laboratory photo-curing units (LPUs) and the results compared with an alternative polymerization method using conventional halogen light source in conjunction with additional polymerization i...

متن کامل

The Effect of Standard and Extended Curing Time in Different Distances on Composite’s Degree of Conversion

Introduction: The aim of this study was to in-vestigate the effect of irradiation duration and distance of light tip to prepared samples in two different light curing unites on the degree of conversion of resin composite. Materials and Methods: Conventional halogen and blue Light emitting diode (LED) units were used for polymerization of an Opalis resin com-posite. The conversion measurements w...

متن کامل

بررسی افزایش دما با دستگاه‌ها و روشهای مختلف تابش در دو نوع کامپوزیت نوری

Background and Aim: The majority of commercial curing units in dentistry are of halogen lamp type. The new polymerizing units such as blue LED are introduced in recent years. One of the important side effects of light curing is the temperature rise in composite resin polymerization which can affect the vitality of tooth pulp. The purpose of this study was to evaluate the temperature rise in two...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 2012  شماره 

صفحات  -

تاریخ انتشار 2012