Can We Work around Numerical Methods? An Insight

نویسندگان

  • Sandeep Chandana
  • René V. Mayorga
چکیده

Introduction Self Sustaining Oscillators are of interest to researchers given the fact that they provide for excellent test beds to study the nuances and intricacies involved in typical oscillatory systems. Numerous such oscillations have been studied using traditional numerical methods in the past, contrary to the propositions of this article. Majority of study of van der Pol equation like oscillatory systems are directed towards deducing a stability criterion. This paper outlines a non-conventional study of the stability standards of the van der Pol Equation. The equation simulates a typical RLC circuit i.e. as a resistor for higher currents, but as a negative resistor for lower currents. Such a behavior is termed Relaxation Oscillation [Nanjundiah 1958]. The van der Pol equation may be defined as an ODE describing oscillations which amplifies smaller oscillations and dampens large oscillations on the other side. It may be obtained by differentiating the Rayleigh Equation and setting y = y’. Detailed analysis of van der Pol equation and its applicability may be found in [Wiggins 1990, Buonomo 1999, Kneubuehl and Kneubhyl 2001]. One of prevalent forms of the van der Pol equation may be given as [Buonomo 1999, Kneubuehl and Kneubhyl 2001]; y” – μ (1 – y) y’ + y = 0 (0)

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

مطالعه عددی انتقال حرارت در فضای مابین دو مخروط ناقص هم‌محور

The behavior of the flow between two coaxial conical cylinders with the inner one rotating and the outer one stationary is studied numerically. The angular velocity of the inner cone cylinder was raised step by step from the rest until reaching its final speed. In this work we first present a numerical simulation of the flow characteristics and the heat transfer mechanism of a fluid in the spac...

متن کامل

Numerical Study on Resistance of a Bulk Carrier Vessel Using CFD Method

Bulk carriers have an important role in international maritime transport. In this paper, we carried out a numerical study on a model of bulk carrier vessel and calculated total resistance of the model. A model of a bulk carrier vessel with length of 2.76 m, breadth of 0.403 m and draught of 0.173 m was selected for numerical modeling. Numerical work was done by commercial CFD software ANSY...

متن کامل

Cooperative aggregate production planning: a game theory approach

Production costs in general, and workforce and inventory costs in particular, constitute a large fraction of the operating costs of many manufacturing plants. We introduce cooperative aggregate production planning as a way to decrease these costs. That is, when production planning of two or more facilities (plants) is integrated, they can interchange workforce and products inventory; thus, thei...

متن کامل

طراحی شکل بدنه یک زیرسطحی خودکنترل با رویکرد مستقیم

The design process of Autonomous Underwater Vehicles (AUVs) involves several steps including design of body shape. Hydrodynamic design of the exterior hull shape is a main step of body shape design. The effective parameters in this process include the length of the nose and tail, the blunt sections of nose and tail as well as the profiles of the nose and the tail. In the presen...

متن کامل

3D Numerical Study on Scouring Around Bridge Piers Under Unsteady Flow Condition

Local scouring around the bridges piers has always been considered as a problem, especially in rivers. If we do not take the necessary actions to avoid the occurrence of this phenomenon or to reduce its influence, then the bridge's piers will be destroyed. Placing the bridge piers' foundation far from the earth's surface will turn out in a plan which is not economic at all. Experimental studies...

متن کامل

Numerical Calculations of Ship Induced Waves

Nowadays, various numerical methods are developed to extend computational fluid dynamics in engineering applications. One of the most useful methods in free surface modeling is Boundary Element Method (BEM). BEM is used to model inviscid fluid flow such as flow around ships. BEM solutions employ surface mesh at all of the boundaries. In order to model the linear free surface, BEM can be modifie...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006