Investigation of Various Essential Factors for Optimum Infrared Thermography
نویسندگان
چکیده
We investigated various essential factors for optimum infrared thermography for cattle clinics. The effect of various factors on the detection of surface temperature was investigated in an experimental room with a fixed ambient temperature using a square positioned on a wall. Various factors of animal objects were examined using cattle to determine the relationships among presence of hair, body surface temperature, surface temperature of the eyeball, the highest temperature of the eye circle, rectum temperature and ambient temperature. Also, the surface temperature of the flank at different time points after eating was examined. The best conditions of thermography for cattle clinics were determined and were as follows: (1) The distance between a thermal camera and an object should be fixed, and the camera should be set within a 45-degree angle with respect to the objects using the optimum focal length. (2) Factors that affect the camera temperature, such as extreme cold or heat, direct sunshine, high humidity and wind, should be avoided. (3) For the comparison of thermographs, imaging should be performed under identical conditions. If this is not achievable, hairless parts should be used.
منابع مشابه
Investigation on the Physical Conditions of Façade Systems of Campus Buildings by Infrared Thermography Tests
Campus buildings are educational facilities where various amount of energy consumption for lighting, heating, cooling and ventilation occurs. Some of the new universities in Turkey, where this investigation takes place, still continue their educational activities in existing buildings primarily designed for different architectural programs and converted to campus buildings via changes of functi...
متن کاملExperimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography
An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...
متن کاملApplications of infrared thermography for the investigation of historic structures
This paper contains an overview of infrared thermography and its applications relating to the investigation of historic structures. In particular, this state of the art, non-destructive technique was used for the assessment of various traditional–historical materials and structures after they had been conserved, restored or repaired using, depending on the case, different treatments. Non-destru...
متن کاملApplication of infrared thermography for predictive/preventive maintenance of thermal defect in electrical equipment
Internal heat of electrical equipment rises due to various reasons such as contact problems, unbalance loading, cracks in insulation, defective relays or terminal blocks, etc until eventual failure which can cause unplanned outages and possible injuries. Therefore, early prevention of thermal abnormalities in electrical equipment is necessary to avoid failure. Nowadays a fast, reliable, non-con...
متن کاملDouble Pulse Infrared Thermography
0. Abstract In this paper we propose a simple enhancing protocol for pulsed infrared thermography. The method is based on stimulating the specimen with two heating pulses separated by a short time interval delta. This approach was tested on several specimens of low and high thermal diffusivity and showed to provide higher thermal contrasts when an optimum interval delta is chosen. The observed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 75 شماره
صفحات -
تاریخ انتشار 2013