Effects of Growth Conditions on Structural Properties of ZnO Nanostructures on Sapphire Substrate by Metal–Organic Chemical Vapor Deposition
نویسندگان
چکیده
ZnO was grown on sapphire substrate by metal-organic chemical vapor deposition using the diethylzinc (DEZn) and oxygen (O(2)) as source chemicals at 500 degrees C. Influences of the chamber pressure and O(2)/DEZn ratio on the ZnO structural properties were discussed. It was found that the chamber pressure has significant effects on the morphology of ZnO and could result in various structures of ZnO including pyramid-like, worm-like, and columnar grain. When the chamber pressure was kept at 10 Torr, the lowest full width at half-maximum of ZnO (002) of 175 arc second can be obtained. On the other hand, by lowering the DEZn flow rate, the crystal quality of ZnO can be improved. Under high DEZn flow rate, the ZnO nanowall-network structures were found to grow vertically on the sapphire substrate without using any metal catalysts. It suggests that higher DEZn flow rate promotes three-dimensional growth mode resulting in increased surface roughness. Therefore, some tip on the ZnO surface could act as nucleation site. In this work, the growth process of our ZnO nanowall networks is said to follow the self-catalyzed growth mechanism under high-DEZn flow rate.
منابع مشابه
Growth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...
متن کاملCharacterization of ZnO Thin Films Grown on c-Sapphire by Pulsed Laser Deposition as Templates for Regrowth of ZnO by Metal Organic Chemical Vapor Deposition
The use of ZnO template layers grown Pulsed Laser Deposition (PLD) has been seen to produce dramatic improvements in the surface morphology, crystallographic quality and optical properties of ZnO layers grown on c-sapphire substrates by Metal Organic Chemical Vapor Deposition. This paper provides complementary details on the PLD-grown ZnO template properties.
متن کاملEffect of growth time on ZnO thin films prepared by low temperature chemical bath deposition on PS substrate
ZnO thin films were successfully synthesized on a porous silicon (PS) substrate by chemical bathdeposition method. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM),and photoluminescence (PL) analyses were carried out to investigate the effect of growth duration(3, 4, 5, and 6 h) on the optical and structural properties of the aligned ZnO nanorods. T...
متن کاملMetal organic chemical vapor deposition and investigation of ZnO thin films grown on sapphire
A new type of large area metal organic chemical vapor deposition (MOCVD) system for the growth of high quality and large size ZnO materials is introduced. Materials properties of the un-doped, nand p-doped ZnO epi-films grown on sapphire substrates by this MOCVD system are studied by various techniques, including high resolution X-ray diffraction (XRD), UV–Visible optical transmission (OT), pho...
متن کاملThe Effect of Annealing, Synthesis Temperature and Structure on Photoluminescence Properties of Eu-Doped ZnO Nanorods
In this study un-doped and Eu-doped ZnO nanorods and microrads were fabricated by Chemical Vapor Deposition (CVD) method. The effects of annealing, synthesis temperature and structure on structural and photoluminescence properties of Eu-doped ZnO samples were studied in detail. Prepared samples were characterized using X-Ray diffraction (XRD), scanning electron microscopy (SEM), particle size a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 4 شماره
صفحات -
تاریخ انتشار 2009