A Novel Approach: Square Spiral Inductor for RF Telemetry Application
نویسندگان
چکیده
This paper presents the design of square spiral inductor on FR4 substrate for different number of turns. Various simulations based on the incipient models were done by varying geometric parameters. Here, we vary the number of turns from 5 to 9 and find out their effect on Inductance (L), Quality factor (Q) and Self resonant frequency (SRF). The development of inductors for RF telemetry applications is studied. For, this square spiral inductors were also fabricated on FR4 substrate by designing the Layout of the inductor using Tanner L-edit tool. Simultaneous change of different parameters with number of turns is presented that allow circuit designer to optimize the integrated inductor in RF telemetry with minimum cost, risk and time. The dependency of inductor performances as inductance, quality factor and self-resonant
منابع مشابه
Synthesis of On-Chip Square Spiral Inductors for RFIC’s using Artificial Neural Network Toolbox and Particle Swarm Optimization
In this paper on-chip square spiral inductors are designed using ANN modeling techniques. Layout geometries form the input of the ANN model and electrical quantities forms the output . The dependency of inductor performances such as inductance (L), quality factor (Q) and self-resonance frequency (SRF) on geometric dimensions are described. Spirals of wide range of RF applications are studied. I...
متن کاملUniversal Mems Platforms for Passive Rf’ Components: Suspended Inductors and Variable Capacitors
We propose a universal MEMS technology platform for fabricating integrable passive components for radio frequency (RF) integrated circuits. This platform is based on a novel surface-micromachined MicroElevator by Self-Assembly (MESA) techque. Both high-Q inductors and variable capacitors can be realized by the MESA technology. A surface-micromachined spiral inductor that is raised by 250 pm abo...
متن کاملSystematic Analysis and Modeling of Integrated Inductors and Transformers in RF IC Design
An efficient modeling technique and a novel CAD tool for the accurate prediction of the performance of integrated inductors and transformers is presented. This generic and process-independent approach generates lumped-element models that easily plug into the RF IC design flow. Their accuracy is established through comparisons with measurements of numerous fabricated inductor structures. This pa...
متن کاملMicrostrip Inductor Design and Implementation
Abstract: Design, simulation, and implementation of microstrip spiral inductors for RF applications at the high frequency (HF) range are given. The simplified lumped element equivalent model parameters for spiral inductor are used to obtain the initial physical dimensions for the design. The spiral inductor is then simulated with planar electromagnetic simulator, Sonnet, using the geometry cons...
متن کاملComparison of RF Inductor Performance Evaluation Methods
— Various model parameter calculation equations of RF CMOS inductors are compared. The calculation equations are using as variables either Y, Z-parameters or S-parameters. Results are based on on-wafer RF S-parameter measurements of a 3.75 turn spiral inductor fabricated in AMIS 0.7 μm CMOS DM1P n-well technology. Results obtained with calculation equations for a differentially driven inductor ...
متن کامل