In vacuo pulsed laser ablation of YBa2Cu3O7−x target for the formation of Y2O3 nanostructures

نویسندگان

  • D. B. Jan
  • Q. X. Jia
چکیده

The formation of superconducting YBa2Cu3O7−x (Y123) by in situ pulsed laser deposition from a stoichiometric Y123 target typically requires an oxygen-ambient environment (P ∼ 100–300-mtorr O2) and appropriate substrate temperature during deposition. We have found that pulsed laser deposition from a Y123 target in vacuo onto a (001) LaAlO3 substrate favors the formation of Y2O3. We observed that the Y2O3(001) films yield three-dimensional nanoscale morphologies that are markedly different from the planar growth surface of conventional superconducting c-axis Y123 films and Y2O3 films formed from the pulsed laser ablation of a Y2O3 target.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of laser ablation using nano-second laser pulses

 In this paper, the laser ablation process based on the irradiation of nanosecond pulsed lasers on a copper target surface in the presence of Helium gas is studied. The dynamical behaviors of the generated plasma in the helium gas and evaporated copper at the atmospheric pressure are examined using a laser pulse, laser wavelength of and intensity of 7×1010W/cm2. A one-dimensional thermal model ...

متن کامل

Flux Pinning Effects of Y2o3 Nanoparticulate Dispersions in Multilayered Ybco Thin Films (postprint)

The flux pinning effects of Y2O3 nanoparticulate inclusions in YBa2Cu3O7 d (Y123 or YBCO) thin films using (Y2O3/Y123) · N multilayer structures were studied. The multilayer films were made with pulsed laser deposition (PLD) on SrTiO3 and LaAlO3 substrates with a Y2O3 nanoparticulate pseudo-layer thickness ranging from 0.2 to 1.4 nm, and YBCO layer thickness varying from 7 to 50 nm. Scanning el...

متن کامل

Synthesis of spherical luminescent particulate coatings

In this communication, we show the feasibility of the pulsed laser ablation technique to make very thin, uniform luminescent coatings on particulate systems. To deposit continuous particulate coatings, the laser-induced plume from the target comes in contact with an agitated bed of core particles ~size 1 mm!. The pressure and nature of the background gas ~inert or active! controls the cluster s...

متن کامل

ساخت نانو بلورک‌های δ-7O3Cu2YBa به روش مکانوشیمیایی و بررسی دمای گذار ترکیبات -7O3Cu2YBa(x-1) + 2 xMnO (02/0 ،015/0 ،01/0 ،005/0 ،0 = x)

In this research, YBa2Cu3O7-d (0 < d < 1) nanocrystalite superconductor was prepared by mechanochemical alloying method. We synthesized YBa2Cu3O7-d via mixing the BaCO3, Y2O3, CuO powders and milling in SPEX 8000 for 5h with weight ratio of ball to powder 10:1 and steel balls of 11mm diameter, followed by heating for 4h at 850 ˚C. The superconductor phase formation process was completed with si...

متن کامل

Time evolution of the electron density and temperature in laser-produced plasmas from YBa2Cu3O7

Laser radiation at 1.06 μm from a pulsed Nd:YAG laser was focused onto a multielement YBa2Cu3O7 target in vacuum and the plasma thus generated was studied using time-resolved spectroscopic techniques. Line broadening of the Ba I emission line at 553.5 nm was monitored as a function of time elapsed after the incidence of a laser pulse on the target. Measured line profiles of barium species were ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002