Low Power, Delay Optimized Buffer Design using 70nm CMOS Technology
نویسندگان
چکیده
This paper addresses the issues of power dissipation and propagation delay in CMOS buffers driving large capacitive loads and proposes a CMOS buffer design for improving power dissipation at optimized propagation delay. The reduction in power dissipation is achieved by minimizing short circuit power and subthreshold leakage power which is predominant when supply voltage (VDD) and threshold voltage (Vth) are scaled for low voltage applications in deep submicron (DSM) region. The proposed buffer has been designed and simulated using Tanner SPICE tool in 70 nm VLSI technology node. The results show that modified taper buffer design provides 15% reduction in power dissipation at same value of propagation delay when compared with conventional design.
منابع مشابه
Low Power, Delay Optimised Buffer Design using 70nm CMOS Technology
This paper addresses the issues of power dissipation and propagation delay in CMOS buffers driving large capacitive loads and proposes a CMOS buffer design for improving power dissipation at optimized propagation delay. The reduction in power dissipation is achieved by minimising short circuit power and subthreshold leakage power which is predominant when
متن کاملA New Enhanced delayed lock loop Design using stand by switch for reduced sub-threshold leakage current
Dual threshold voltages domino design methodology utilizes low threshold voltages for all transistors that can switch during the evaluate mode and utilizes high threshold voltages for all transistors that can switch during the pre charge modes. We employed standby switch can strongly turn off all of the high threshold voltage transistors which enhances the effectiveness of a dual threshold volt...
متن کاملDesign of Optimized Quantum-dot Cellular Automata RS Flip Flops
Complementary metal-oxide semiconductor (CMOS) technology has been the industry standard to implement Very Large Scale Integrated (VLSI) devices for the last two decades. Due to the consequences of miniaturization of such devices (i.e. increasing switching speeds, increasing complexity and decreasing power consumption), it is essential to replace them with a new technology. Quantum-dot c...
متن کاملA New Low-Voltage, Low-Power and High-Slew Rate CMOS Unity-Gain Buffer
Class-AB circuits, which are able to deal with currents several orders of magnitude larger than their quiescent current, are good candidates for low-power and high slew-rate analog design. This paper presents a novel topology of a class AB flipped voltage follower (FVF) that has better slew rate and the same power consumption as the conventional class-AB FVF buffer previously presented in liter...
متن کاملLow-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کامل