Performance Comparison of Cross-Like Hall Plates with Different Covering Layers
نویسندگان
چکیده
This paper studies the effects of the covering layers on the performance of a cross-like Hall plate. Three different structures of a cross-like Hall plate in various sizes are designed and analyzed. The Hall plate sensitivity and offset are characterized using a self-built measurement system. The effect of the P-type region over the active area on the current-related sensitivity is studied for different Hall plate designs. In addition, the correlation between the P-type covering layer and offset is analyzed. The best structure out of three designs is determined. Besides, a modified eight-resistor circuit model for the Hall plate is presented with improved accuracy by taking the offset into account.
منابع مشابه
Influences of an Aluminum Covering Layer on the Performance of Cross-Like Hall Devices
This work studies the effects of an aluminum covering on the performance of cross-like Hall devices. Four different Hall sensor structures of various sizes were designed and fabricated. The sensitivity and offset of the Hall sensors, two key points impacting their performance, were characterized using a self-built measurement system. The work analyzes the influences of the aluminum covering on ...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملUnsteady MHD Couette-Hartmann flow through a porous medium bounded by porous plates with Hall current, ion-slip and Coriolis effects
Effects of Hall current, ion-slip and Coriolis force on unsteady MHD Couette-Hartmann flow of a viscous incompressible electrically conducting fluid through a porous medium bounded by porous plates in the presence of a uniform transverse magnetic field which is either fixed relative to the fluid or to the moving porous plate is investigated using Laplace transform technique. The expressions for...
متن کاملEstimation of Sound Absorption Behavior of Combined Panels Comprising Kenaf Fibers and Micro-Perforated Plates below 2500 Hertz
Introduction: Natural materials are more efficient and attractive than synthetic materials. In this study, the sound absorption behavior by natural kenaf composite and Micro-Perforated Panel (MPP) at low and medium frequency region was investigated. Material and Methods: Initially, the results of kenaf fibers with a thickness of 10 mm were validated by the Finite Element Method (FEM) based on ...
متن کامل