Amorphous effect on the advancing of wide-range absorption and structural-phase transition in γ-In2Se3 polycrystalline layers

نویسنده

  • Ching-Hwa Ho
چکیده

The exploitation of potential functions in material is crucial in materials research. In this study, we demonstrate a III-VI chalcogenide, polycrystalline γ-In2Se3, which simultaneously possesses the capabilities of thickness-dependent optical gaps and wide-energy-range absorption existed in the polycrystalline layers of γ-In2Se3. Transmission electron microscopy and Raman measurement show a lot of γ-phase nanocrystals contained in the disordered and polycrystalline state of the chalcogenide with medium-range order (MRO). The MRO effects on the γ-In2Se3 layers show thickness-dependent absorption-edge shift and thickness-dependent resistivities. The amorphous effect of MRO also renders a structural-phase transition of γ → α occurred inside the γ-In2Se3 layer with a heat treatment of about 700 °C. Photo-voltage-current (Photo V-I) measurements of different-thickness γ-In2Se3 layers propose a wide-energy-range photoelectric conversion unit ranging from visible to ultraviolet (UV) may be achieved by stacking γ-In2Se3 layers in a staircase form containing dissimilar optical gaps.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

In-situ HRPD study of superstructure OII phase in polycrystalline samples of YBCOx at 300 ºC

Superstructure orthorhombicII (OII) phase in polycrystalline samples of YBCOx was observed by using synchrotron in-situ high resolution powder diffraction (HRPD) techniques at 300˚C. Rietveld method (RM) refinement was employed to analyse the collected diffraction data under proper oxygen partial pressure atmospheres. Our study indicates that by oxygen uptake, the samples undergo structural pha...

متن کامل

A Comparison between the Effect of Cr and W Addition on Formation Kinetic of Nanostructure TiAl(γ) Alloy by Mechanical Alloying Route

In this research, mechanical alloying was used to produce Ti-50Al, Ti-45Al-5Cr and Ti-45Al-5W (at%) alloys. The effect of ternary addition (Cr and W) on microstructure and production efficiency of TiAl alloy were investigated. Alloying was performed in a planetary mill and the milling time varying from 5 to 70h. The structural evaluation in these powders was done by X-ray diffraction (XRD) tech...

متن کامل

Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms

This work is focused on the effect of amorphous SiO2 addition on the phase transformation and microstructural evolution of ZrO2 particles. Considering the structural similarities between the amorphous ZrO2 and its tetragonal structure, XRD results showed initial nucleation of metastable tetragonal ZrO2 from its amorphous matrix upon heat treatment. This metastable phase is unstable in pure ZrO2...

متن کامل

Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying

Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...

متن کامل

Effect of Thickness on Structural and Morphological Properties of AlN Films Prepared Using Single Ion Beam Sputtering

Aluminum nitride (AlN) thin films have potential applications in microelectronic and optoelectronic devices. In this study, AlN thin films with different thicknesses were deposited on silicon substrate by single ion beam sputtering method. The X-ray diffraction (XRD) spectra revealed that the structure of films with thickness of - nm was amorphous, while the polycrystalline hexagonal AlN with a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2014