Electromagnetic forces of the cage rotor in conical whirling motion
نویسندگان
چکیده
The paper deals with the electromagnetic forces in induction machines when the rotor is in cylindrical whirling motion, symmetric conical whirling motion or combination of them. These motions describe the eccentric movements of the rigid rotor in induction machines. The time stepping finite element analysis is used for solving the magnetic field, and the forces are calculated from the air gap by a method based on the principle of virtual work. The forces are measured for a test motor equipped with active magnetic bearings. The active magnetic bearings are used to generate the eccentric rotor motions and also to measure the electromagnetic forces. The computed and calculated forces show relatively good agreement. Based on the calculated and measured results, a simple analytical model is developed to describe the electromagnetic forces of the rigid rotor motions.
منابع مشابه
Electromagnetic forces in cage induction motors with rotor eccentricity
The paper deals with the electromagnetic forces in induction machines when the rotor is performing eccentric motion with respect to the stator. The studied eccentric motions of the rigid cage rotor are cylindrical circular whirling motion, symmetric conical whirling motion and the combination of these two basic modes of eccentric motions. The multi-slice, time stepping finite element analysis i...
متن کاملImprovement of Electromagnetic Forces in a Single-Phase Induction Motor by Providing a New Winding Distribution
Single-phase induction motors have a wide range of domestic and industrial applications. These motors have a squirrel cage rotor and their stator usually has two windings: main and auxiliary. The use of auxiliary winding in the structure of single-phase induction motors creates two unbalance and asymmetric phases. This causes to increase the spatial harmonics of the field in the air gap, and al...
متن کاملLow-order parametric force model for eccentric-rotor electrical machine equipped with parallel stator windings and rotor cage
In the paper, a new low-order parametric force model for an electrical machine with eccentric rotor is developed and verified. The model is designed for an electrical machine equipped with both the parallel stator windings and rotor cage, and, therefore, accounts for the equalising currents in the stator and rotor windings separately and also for their influence on each other. Furthermore, the ...
متن کاملElectromechanical interaction in rotordynamics of cage induction motors
Electromagnetic fields in the air gap of an electric machine produce electromagnetic forces between the rotor and stator. The total force exerted on the rotor due to the eccentric rotor position is called the unbalanced magnetic pull. This eccentricity force is directed roughly over the shortest air gap. At low frequencies, the vibration amplitudes of flexural modes may be large enough to coupl...
متن کاملA Finite Element Perturbation Method for Computing Fluid-induced Forces on a Centrifugal Impeller Rotating and Whirling in a Volute Casing
A nite element based method has been developed for computing time-averaged uid-induced radial excitation forces and rotor dynamic forces on a two-dimensional centrifugal impeller rotating and whirling in a volute casing. In this method potential ow theory is used, which implies the assumption of irrotational inviscid ow. In comparison with other analyses of uid-induced impeller forces, two main...
متن کامل