Wave Tank Testing and Model Validation of an Autonomous Wave Energy Converter
نویسندگان
چکیده
A key component in bringing ocean wave energy converters from concept to commercialization is the building and testing of scaled prototypes to provide model validation. A one quarter scale prototype of an autonomous two body heaving point absorber was modeled, built, and tested for this work. Wave tank testing results are compared with two hydrodynamic and system models—implemented in both ANSYS AQWA and MATLAB/Simulink—and show model validation over certain regions of operation. This work will serve as a guide for future developers of wave energy converter devices, providing insight in taking their design from concept to prototype stage.
منابع مشابه
System Identification of a Heaving Point Absorber: Design of Experiment and Device Modeling
Abstract: Empirically based modeling is an essential aspect of design for a wave energy converter. Empirically based models are used in structural, mechanical and control design processes, as well as for performance prediction. Both the design of experiments and methods used in system identification have a strong impact on the quality of the resulting model. This study considers the system iden...
متن کاملExperimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter
This paper describes the innovative offshore point-absorber wave energy converter (WEC), IRWEC1, under development by the Hydrodynamics, Acoustics and Marine propulsion Group at Babol Noshirvani University of Technology. Totally enclosed in an outer shell, with no external moving parts, IRWEC1 is completely sealed which make it a robust and trustable system. Important motion for this WEC is the...
متن کاملHydrodynamic Design Optimization and Wave Tank Testing of a Self-Reacting Two-Body Wave Energy Converter
As worldwide energy consumption continues to increase, so does the demand for renewable energy sources. The total available wave energy resource for the United States alone is 2,640 TWh/yr; nearly two thirds of the 4,000 TWh of electricity used in the United States each year. It is estimated that nearly half of that available energy is recoverable through wave energy conversion techniques. In t...
متن کاملDevelopment of a mathematical model to design an offshore wind and wave hybrid energy system
Fossil Fuels are always considered as environmental pollutants. On the other hand, the political and economic situations highly affect the price of these fuels. Offshore wind and wave, as renewable energy sources, represent the better alternatives for electricity generation. Therefore, it is necessary that wind speeds effectively be estimated due to the absence of field measurements of the wind...
متن کاملWec-sim Phase 1 Validation Testing - Experimental Setup and Initial Results
In the wave energy industry, there is a need for open source numerical codes and publicly available experimental data, both of which are being addressed through the development of WEC-Sim by Sandia National Laboratories and the National Renewable Energy Laboratory (NREL). WEC-Sim is an open source code used to model wave energy converters (WECs) when subject to incident waves. In order for the ...
متن کامل