Height Control for a One-Legged Hopping Robot using a Two-Dimensional Model
نویسندگان
چکیده
This paper describes a model-based height controller for a one-legged hopping robot. Equations of motion in two dimensions (i.e. the sagittal plane) are developed. These equations are solved and numerically integrated to produce an actuator command that will allow the robot to regulate its apex height.
منابع مشابه
Fast and Adaptive Hopping Height Control of Single-legged Robot
Research on running robots has generally focussed on the steady-state. When the ground has limited foot placement surfaces or there are sudden changes in height then steady-state running is not possible. It becomes necessary to make step-bystep adjustments to place the foot. In this paper a mass-spring-damper model of a robot’s leg is used to develop a hopping controller capable of meeting rapi...
متن کاملHeight Control for a One-Legged Hopping Robot using a One-Dimensional Model
The hopping machine considered in this paper is like a pogo-stick; it has a small foot and a leg spring. Unlike a pogo-stick which uses a mechanical spring, the spring for the hopper is pneumatic. The controller is based on Raibert’s three-part control system [1]. Raibert controlled hopping height by delivering a specified thrust value during stance. This paper describes a model-based height co...
متن کاملHopping peak height algorithm for a one legged robot hopping height control
This paper presents the hopping peak height algorithm in controlling the hopping height of a one legged hopping robot. The hopping mechanism produces continuous and rhythmic pattern. The continuous and rhythmic pattern behaviors produce oscillation feedback to the closed loop system and continuously produce oscillation error to the controller. Therefore, hopping peak height algorithm is designe...
متن کاملThe SAHR Setup - Controlling Hopping Speed and Height Using a Single Actuator
In this paper we present and experimentally validate a control method for regulating both the forward speed and the apex height of a one legged hopping robot, using only a single actuator. The control method is based on a dynamic model of the hopping robot and makes use of the dynamic coupling of the vertical and forward motions of the robot. The control is applied first to a simulated model of...
متن کاملModel-Based Identification and Control of a One-Legged Hopping Robot
MODEL-BASED IDENTIFICATION AND CONTROL OF A ONE-LEGGED HOPPING ROBOT Hasan Eftun Orhon M.S. in Electrical and Electronics Engineering Advisor: Ömer Morgül January 2018 Spring-mass models are well established tools for the analysis and control of legged locomotion. Among the alternatives, spring-loaded inverted pendulum (SLIP) model has shown to be a very accurate descriptor of animal locomotion...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001