Stress-induced martensitic phase transformation in thin sheets of Nitinol

نویسندگان

  • S. Daly
  • G. Ravichandran
  • K. Bhattacharya
چکیده

Using the in situ optical technique known as digital image correlation (DIC), full-field quantitative strain maps of localization have been experimentally obtained for the first time in thin sheets of Nitinol. The use of DIC provides new information connecting previous observations on the microand macro-scales. It shows that the transformation initiates before the formation of localized bands, and the strain inside the bands does not saturate when they nucleate. The effect of rolling texture on the macroscopic stress–strain behavior was observed and it is shown that the resolved stress criterion or Clausius–Clapeyron relation does not hold for polycrystalline Nitinol. Finally, the effect of geometric defects on localization behavior was observed. 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical fatigue and fracture of Nitinol

Nitinol, a near equiatomic intermetallic of nickel and titanium, is the most widely known and used shape memory alloy. Owing to its capacity to undergo a thermal or stress induced martensitic phase transformation, Nitinol displays recoverable strains that are more than an order of magnitude greater than in traditional alloys, specifically as high as 10%. Since its discovery in the 1960s, Nitino...

متن کامل

Symmetry and reversibility of martensitic transformations

Martensitic transformations are diffusionless solid-to-solid phase transformations characterized by a rapid change of crystal structure, observed in metals, alloys, ceramics, and proteins. They come in two widely different classes. In steels, the transformation microstructure induced by quenching remains essentially unchanged upon subsequent loading or heating; the transformation is not reversi...

متن کامل

Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique

In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...

متن کامل

Fatigue-Crack Growth Behavior in the Superelastic and Shape-Memory Alloy Nitinol

This article presents a study of fatigue-crack propagation behavior in Nitinol, a 50Ni-50Ti (at. pct) superelastic/shape-memory alloy, with particular emphasis on the effect of the stress-induced martensitic transformation on crack-growth resistance. Specifically, fatigue-crack growth was characterized in stable austenite (at 120 8C), superelastic austenite (at 37 8C), and martensite (at 265 8C...

متن کامل

An experimental investigation of crack initiation in thin sheets of nitinol

An experimental investigation into the fracture properties of 160-lm-thick edge-cracked specimens of austenitic nickel–titanium (nitinol) under uniaxial tension is presented. Using the in situ optical technique of digital image correlation (DIC), strain fields directly relating to phase boundary nucleation and propagation of fracture samples were observed for the first time. The shape and size ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007