Design and Analysis of Composite Leaf Spring for Light Vehicles
نویسندگان
چکیده
Reducing weight while increasing or maintaining strength of products is getting to be highly important research issue in this modern world. Composite materials are one of the material families which are attracting researchers and being solutions of such issue. In this paper we describe design and analysis of composite leaf spring. The objective is to compare the stresses and weight saving of composite leaf spring with that of steel leaf spring. The design constraint is stiffness. The Automobile Industry has great interest for replacement of steel leaf spring with that of composite leaf spring, since the composite materials has high strength to weight ratio, good corrosion resistance. The material selected was glass fiber reinforced polymer (E-glass/epoxy), carbon epoxy and graphite epoxy is used against conventional steel. The design parameters were selected and analyzed with the objective of minimizing weight of the composite leaf spring as compared to the steel leaf spring. The leaf spring was modeled in Auto-CAD 2012 and the analysis was done using ANSYS 9.0 software.
منابع مشابه
Analysis and optimization of a composite leaf spring
A four-leaf steel spring used in the rear suspension system of light vehicles is analyzed using ANSYS V5.4 software. The finite element results showing stresses and deflections verified the existing analytical and experimental solutions. Using the results of the steel leaf spring, a composite one made from fiberglass with epoxy resin is designed and optimized using ANSYS. Main consideration is ...
متن کاملA Comparative Study of Standard, Casted and Riveted Eye Design of a Mono Leaf Spring Using CAE Tools
The objective of the present study is to determine better eye end design of a mono leaf spring used in light motor vehicle. A conventional 65Si7 spring steel leaf spring model with standard eye, casted and riveted eye end are considered. The CAD model of the leaf springs is prepared in CATIA and analyzed using ANSYS. The standard eye, casted and riveted eye leaf springs are subjected to similar...
متن کاملNumerical and Experimental Stress Analysis of a Composite Leaf Spring
Automobile sector is always focusing on enhancing level of comfort, fuel economy, customer satisfaction and safety. Vehicle weight reduction increases the overall fuel efficiency. Use of composite materials has made it possible to reduce the weight of the vehicle, without reduction in load carrying capacity. Now a day's manufacturers and researchers are trying to replace conventional material p...
متن کاملDevelopment of a Composite Leaf Spring for a Light Commercial Vehicle (Tata Magic)
Present time the main issue of automobile industry are weight reduction. The automobile industry has looking for any implementation or modification to reduce the weight of the vehicle. The suspension leaf spring is one of the potential items for weight reduction in automobile as it accounts for 10% to 20% of the unsprung weight. The introduction of composite leaf spring made of glass fiber rein...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013