Mechanism behind Erosive Bursts In Porous Media.
نویسندگان
چکیده
Erosion and deposition during flow through porous media can lead to large erosive bursts that manifest as jumps in permeability and pressure loss. Here we reveal that the cause of these bursts is the reopening of clogged pores when the pressure difference between two opposite sites of the pore surpasses a certain threshold. We perform numerical simulations of flow through porous media and compare our predictions to experimental results, recovering with excellent agreement shape and power-law distribution of pressure loss jumps, and the behavior of the permeability jumps as a function of particle concentration. Furthermore, we find that erosive bursts only occur for pressure gradient thresholds within the range of two critical values, independent of how the flow is driven. Our findings provide a better understanding of sudden sand production in oil wells and breakthrough in filtration.
منابع مشابه
Impact of Internal Structure on Foam Stability in Model Porous Media
Application of foam in EOR, increases macroscopic sweep efficiency via awesome increscent of mobility control. Macroscopic manifestation of foam application performance in porous media is complex process that involves several interacting microscopic foam events. Stability as an important factor in foam injection within large reservoirs, depends on several variables including oil saturation, con...
متن کاملA Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources
In this paper a numerical method is used to study the unsteady state natural convection heat transfer within a confined porous media with uniform internal heat generation. The governing equations based on the Darcy model and Bossiness approximations are solved, using the finite difference Alternating Direction Implicit (ADI) method. The developed program was used to simulate natural convection ...
متن کاملSynthesis and characterization of porous zinc oxide nano-flakes film in alkaline media
In this study, porous zinc oxide nano-flakes were successfully synthesized by anodization method on zinc substrate in a 0.025 M NaOH and 0.05 M NH4Cl solution with the voltage of 10 V at room temperature. The field emission scanning electron microscopy’s (FESEM) images show the structural evolution during 90 min of the anodization process. They also demonstrate the dependency of growth of ZnO f...
متن کاملمطالعه عددی انتقال حرارت جابه جایی طبیعی نانوسیال در یک محیط متخلخل مربعی شکل با استفاده از روش شبکه بولتزمن
In this study, for the first time natural convection heat transfer of Al2O3-water nanofluid with constant and variable properties is investigated within square shape porous media using the lattice Boltzmann method. The horizontal walls of the cavity are insulated, and left and right vertical walls are hot and cold, respectively. The Study have been carried out for Rayleigh numbers of 103, 10...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Physical review letters
دوره 119 12 شماره
صفحات -
تاریخ انتشار 2017