Transient stability improvement by using shunt FACT device (STATCOM) with Reference Voltage Compensation (RVC) control scheme
نویسندگان
چکیده
This paper presents transient stability and power flow models of static synchronous compensator (STATCOM) and current Sourced Inverter (CSI) based Flexible AC Transmission System (FACTS) Controllers. A model of the static synchronous compensator (STATCOM), the application of the static synchronous compensator (STATCOM) in improving transient stability in power systems.MATLAB/SIMULINK is used to simulate the system under study. 'This paper presents a control block diagram of STATCOM for the transient stability improvement. The MATLAB/SIMULINK software package is used for simulation of test system. In this paper the STATCOM is connected to the 230KV line for a typical two machine transmission system. The study demonstrates that STATCOM not only considerably improves transient stability in steady stat. Due to its simplicity, robustness and ease implementation, proportional integral derivative (PID) controller along with auxiliary feedback signals are used to control the inverter firing angle and hence control the reactive power exchange between the AC system and the STATCOM.
منابع مشابه
Control of Synchronous Generator Excitation and Rotor Angle Stability by using Static Synchronous Compensator (STATCOM) with Reference Voltage Compensation (RVC) Simulation Method
The static synchronous compensator (STATCOM) is one type of FACTS devices which resembles in many respects a rotating synchronous condenser used for voltage control and reactive power compensation. The STATCOM can increase transmission capacity, damping low frequency oscillation, and improving transient stability. This paper investigated for the transient stability improvement by using static s...
متن کاملFast Transient Hybrid Neuro Fuzzy Controller for STATCOM During Unbalanced Voltage Sags
A static synchronous compensator (STATCOM) is generally used to regulate voltage and improve transient stability in transmission and distribution networks. This is achieved by controlling reactive power exchange between STATCOM and the grid. Unbalanced sags are the most common type of voltage sags in distribution networks. A static synchronous compensator (STATCOM) is generally used to maintain...
متن کاملDigital implementation of an advanced static compensator for voltage profile improvement, power-factor correction and balancing of unbalanced reactive loads
In this paper, a three-phase advanced static compensator (STATCOM) is proposed to compensate reactive power either for regulating ac supply voltage at a constant value or for unity power-factor and balancing of unbalanced reactive loads. An insulated gate bipolar transistor (IGBT) based current controlled pulse width modulated (CC-PWM) and voltage source inverter (VSI) is employed as the STATCO...
متن کامل“Compensation of Reactive Power Using D-STATCOM”
The D-STATCOM is a shunt connected FACTS device which supplies reactive power to the load to improve the voltage stability of the load busses. The D-STAT COM in multi bus system is capable of reducing the losses and improving the voltage regulation.This work deals with comparison of Push Pull and Voltage Inverter based D-STATCOM for multi bus system. Eight bus system is modeled using the elemen...
متن کاملTwo-Area Power System Stability Improvement using a Robust Controller-based CSC- STATCOM
A current source converter (CSC) based static synchronous compensator (STATCOM) is a shunt flexible AC transmission system (FACTS) device, which has a vital role in stability support for transient instability and damping support for undesirable interarea oscillations in an interconnected power network. A robust pole-shifting based controller for CSC-STATCOM with damping stabilizer is proposed. ...
متن کامل