Numerical simulation of the fluid dynamic effects of laser energy deposition in air
نویسندگان
چکیده
Numerical simulations of laser energy deposition in air are conducted. Local thermodynamic equilibrium conditions are assumed to apply. Variation of the thermodynamic and transport properties with temperature and pressure are accounted for. The flow field is classified into three phases: shock formation; shock propagation; and subsequent collapse of the plasma core. Each phase is studied in detail. Vorticity generation in the flow is described for short and long times. At short times, vorticity is found to be generated by baroclinic means. At longer times, a reverse flow is found to be generated along the plasma axis resulting in the rolling up of the flow field near the plasma core and enhancement of the vorticity field. Scaling analysis is performed for different amounts of laser energy deposited and different Reynolds numbers of the flow. Simulations are conducted using three different models for air based on different levels of physical complexity. The impact of these models on the evolution of the flow field is discussed.
منابع مشابه
Numerical Study of Heat Transfer and Aerosol Deposition in a Room Environment with Under-floor or Baseboard Heating Systems
In this study, heat transfer and aerosol deposition in the under-floor and baseboard heating systems have been investigated, numerically. The aim of this study is a comparison between these heating systems. This comparison obtains the optimal heating system with low suspended particles in the air. Computational fluid dynamic with Eulerian-Lagrangian method has been used to simulate fluid and pa...
متن کاملEvaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds
Accurate modeling of fluidization and heat transfer phenomena in gas-solid fluidized beds is not solely dependent on the particular selected numerical model and involved algorithms. In fact, choosing the right model for each specific operating condition, the correct implementation of each model, and the right choice of parameters and boundary conditions, determine the accuracy of the results i...
متن کاملMultiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics
Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...
متن کاملAnalysis of Chlorine Gas Incident Simulation and Dispersion Within a Complex and Populated Urban Area Via Computation Fluid Dynamics
In some instances, it is inevitable that large amounts of potentially hazardous chemicals like chlorine gas are stored and used in facilities in densely populated areas. In such cases, all safety issues must be carefully considered. To reach this goal, it is important to have accurate information concerning chlorine gas behaviors and how it is dispersed in dense urban areas. Furthermore, mainta...
متن کاملAnalysis of air injection system for drag reduction in high speed vessels using numerical simulation software ANSYS-Fluid Flow
Many existing phenomena in nature are considered new design ideas in various fields of industry. Bionics is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. By performing bionic review, the researchers found the penguins by delivering air locked under their wings and creating air bubbles, the drag significant...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008