Diamond Coating in Accelerator Structure
نویسندگان
چکیده
The future accelerators with 1 GeV/m gradient will give rise to hundreds of degrees instantaneous temperature rise on the copper surface. Due to its extraordinary thermal and electric properties, diamond coating on the surface is suggested to remedy this problem. Multi-layer structure, with the promise of even more temperature reduction, is also discussed, and a proof of principle experiment is being carried out.
منابع مشابه
STUDY OF CHARACTERIZATION AND CORROSION RESISTANCE OF NIP/NANO-DIAMOND ELECTROLESS COMPOSITE DEPOSITION
Ni-P Electroless coatings provide appropriate resistance to wear and corrosion. Co-deposition of particles between layers can improve their properties, especially general corrosion and erosion-corrosion behavior by means of nano diamond as reinforcing particles. In this study Ni-P/nano diamond composite deposition were deposited on steel substrate. Structure of the coatings and corrosion r...
متن کاملEffects of pressure and temperature on sp fraction in diamondlike carbon materials
In this work, formation of diamond coating is studied using large-scale molecular dynamics (MD) simulation. The diamond coating is studied to explore how and to what extent the temperature and pressure affects the deposition structure. To analyze the coating results, the radial distribution function and the fraction of diamond (sp bonds) is calculated. It is found that the sp fraction in the de...
متن کاملOn the Cold Emission Mechanism of Diamond Coated Tips
A formal implementation of the Fowler-Nodheim equation to emission characteristics of diamond coated cold cathodes gives values of the work function which depend on surface curvature of the coating, thus making it incorrect. Experiments with diamond coated Si tips having different coating radii have shown, that their emissivity depends on the radius of the Si tip rather than on the radius of th...
متن کاملEnhancement of oxidation resistance via a self-healing boron carbide coating on diamond particles
A boron carbide coating was applied to diamond particles by heating the particles in a powder mixture consisting of H3BO3, B and Mg. The composition, bond state and coverage fraction of the boron carbide coating on the diamond particles were investigated. The boron carbide coating prefers to grow on the diamond (100) surface than on the diamond (111) surface. A stoichiometric B4C coating comple...
متن کاملCharacterization of Diamond-Like Film after Focused Ion Beam Processing
Optical properties (transmission and refractive index) and chemical structure (XPS) of diamond-like coating (DLC) film before and after focused ion beam milling (FIBM) process, were investigated in this paper. It is shown by our FIBM experiment that influence of FIBM on Optical properties and chemical structure of the DLC film is not apparent, especially in near-infra region. The film still ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998