Comparison of 3-PP̲R parallel planar manipulators based on their sensitivity to joint clearances
نویسندگان
چکیده
In this paper, 3-PPR planar parallel manipulators with ∆or U-shape base are compared with respect to their workspace size and kinematic sensitivity to joint clearances. First, the singularities and workspace of a general 3-PPR planar parallel manipulator are analyzed. Then, an error prediction model applicable to both serial and parallel manipulators is developed. As a result, two nonconvex quadratically constrained quadratic programs are formulated in order to find the maximum reference-point position error and the maximum orientation error of the moving-platform for given joint clearances. Finally, the contributions of the paper are highlighted by means of a comparative study of two manipulators.
منابع مشابه
Optimization of the Kinematic Sensitivity and the Greatest Continuous Circle in the Constant-orientation Workspace of Planar Parallel Mechanisms
This paper presents the results of a comprehensive study on the efficiency of planar parallel mechanisms, considering their kinetostatic performance and also, their workspace. This aim is approached upon proceeding single- and multi-objective optimization procedures. Kinetostatic performances of ten different planar parallel mechanisms are analyzed by resorting to a recent index, kinematic sens...
متن کاملDynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...
متن کاملComparison of 3-rpr Planar Parallel Manipulators with Regard to Their Kinetostatic Performance and Sensitivity to Geometric Uncertainties
ABSTRACT: This paper deals with the sensitivity analysis of 3-RPR planar parallel manipulators. First, the manipulators under study as well as their degeneracy conditions are presented. Then, an optimization problem is formulated in order to obtain their maximal regular dexterous workspace. Moreover, the sensitivity coefficients of the pose of the manipulator moving platform to variations in th...
متن کاملA new method for the estimation of position accuracy in parallel manipulators with joint clearances
This paper presents a novel method based on screw theory for the analysis of positioning accuracy in parallel manipulators with joint clearances. A general method is introduced, and a new analytical procedure is formulated which allows to determine analytically a suboptimal estimation of the worst case condition for positioning accuracy. Moreover this procedure can determine exactly the worst-c...
متن کاملForward kinematic analysis of planar parallel robots using a neural network-based approach optimized by machine learning
The forward kinematic problem of parallel robots is always considered as a challenge in the field of parallel robots due to the obtained nonlinear system of equations. In this paper, the forward kinematic problem of planar parallel robots in their workspace is investigated using a neural network based approach. In order to increase the accuracy of this method, the workspace of the parallel robo...
متن کامل