Direct measurement of bend-induced mode deformation in large-mode-area fibers.

نویسندگان

  • R C G Smith
  • A M Sarangan
  • Z Jiang
  • J R Marciante
چکیده

In 1976 Marcuse developed an equivalent index model to predict the effects of bending in waveguides, and predicted deformation of the spatial modes in bent optical fibers. Perturbative approaches have been previously applied and tested to predict the behavior of single- and few-moded-fibers. However, much more significant mode deformation has been predicted for large-mode-area fibers than for single- or few-moded-fibers. In this paper, the spatial profiles of modes deformed by bending in large-mode-area fibers are measured for the first time. A finite difference method employing the equivalent index model is used to calculate the modes of the helical fiber, which show an offset that is twice as large as that predicted for single-mode fiber, and mode compression that is five times greater. These calculated results are compared to the experimental data, yielding significantly better agreement than previous perturbative approaches.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Predicting macrobending loss for large-mode area photonic crystal fibers.

We report on an easy-to-evaluate expression for the prediction of the bend-loss for a large mode area photonic crystal fiber (PCF) with a triangular air-hole lattice. The expression is based on a recently proposed formulation of the V-parameter for a PCF and contains no free parameters. The validity of the expression is verified experimentally for varying fiber parameters as well as bend radius...

متن کامل

Leakage channel fibers with microstuctured cladding elements: a unique LMA platform.

We present a novel design of leakage channel fiber (LCF) that incorporates an air-hole lattice to define the modal filtering characteristics. The approach has the potential to offer single-mode, large mode area (LMA) fibers in a single-material platform with bend loss characteristics comparable to all-solid (LCFs) whilst at the same time providing significant fabrication benefits. We compare th...

متن کامل

Bending-induced mode non-degeneracy and coupling in chalcogenide negative curvature fibers.

We study bend loss in chalcogenide negative curvature fibers with different polarizations, different tube wall thicknesses, and different bend directions relative to the mode polarization. The coupling between the core mode and tube modes induces bend loss peaks in the two non-degenerate modes at the same bend radius. There is as much as a factor of 28 difference between the losses of the two p...

متن کامل

Comprehensive Theoretical Study on Threshold Power of Stimulated Brillouin Scattering in Single-Mode Fibers

We have investigated and developed a theoretical approach to explore stimulated Brillouin scattering (SBS) phenomena in single mode fiber. SBS happening threshold power condition has been studied in terms of fiber parameters and input pump power. To assess threshold power precisely, the pump depletion effect and fiber loss has been included by employing 1% criterion. The threshold exponential g...

متن کامل

Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron

It is well-known that severe deformation to metals causes a direct grain refinement of the matrix without special heat-treatments due to the mechanism of dynamic continuous recrystallization (DCR). However, the microstructural revolution during severe deformation is seemed to be different depending on the deformation mode, namely the direction of deformation. In general, multi-directional defor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics express

دوره 20 4  شماره 

صفحات  -

تاریخ انتشار 2012