A New Vision Inspection Method for Wood Veneer Classification
نویسندگان
چکیده
A vision-based inspection method based on rough set theory, fuzzy set and BP algorithm is presented. The rough set method is used to remove redundant features for its data analysis and procession ability. The reduced data is fuzzified to represent the feature data in a more suitable form as input data of a BP network classifier. By the experimental research, the hybrid method shows good classification accuracy and short running time, which are better than the results using BP network and neural network with fuzzy input.
منابع مشابه
Machine Vision Technology the Forest for Products Industry
W hen a tree is felled, a process begins to maximize the value of that wood. The log is taken to a sawmill, where someone decides whether the wood is more valuable as lumber, veneer, or chips. If the log is made into lumber, boards cut from it must be edged and trimmed, a process that requires someone to decide how to trim off defective parts and make the board as valuable as possible. Then som...
متن کاملSelf-Organizing Feature Extraction in Recognition of Wood Surface Defects and Color Images
A method for constructing classiication features with unsupervised learning is presented. The method is based on clustering of the high dimensional measurements into a small number of features with self-organizing maps. The histograms of the self-organized features are classiied with a multilayer perceptron network, that can pick up the relevant features and feature combinations from the histog...
متن کاملA neurofuzzy color image segmentation method for wood surface defect detection
In the last decades, several automated visual inspection (AVI) systems have been developed and applied to a wide range of products, including wood (Pham and Alcock 2003). AVI is an automated form of quality control normally achieved using a camera connected to a computer. The AVI framework includes five processing stages: image acquisition, image enhancement, image segmentation, feature extract...
متن کامل3D Molding of Veneers by Mechanical and Pneumatic Methods
This paper deals with the influence of selected methods (mechanical and pneumatic) as well as various factors (wood species, moisture content, veneer shape, punch diameter, laminating foil thickness, holding method, plasticizing) on 3D molding of veneers. 3D molding was evaluated on the basis of maximum deflection of birch and beech veneers. Cracks and warping edges were also evaluated in selec...
متن کاملAutomated visual inspection system for wood defect classification using computational intelligence techniques
This article presents improvements in the segmentation module, feature extraction module, and the classification module of a low-cost automated visual inspection (AVI) system for wood defect classification. One of the major drawbacks in the low-cost AVI system was the erroneous segmentation of clear wood regions as defects, which then introduces confusion in the classification module. To reduce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Computer and Information Science
دوره 1 شماره
صفحات -
تاریخ انتشار 2008