Second Order Properties of Error Surfaces

نویسندگان

  • Yann LeCun
  • Ido Kanter
  • Sara A. Solla
چکیده

The learning time of a simple neural network model is obtained through an analytic computation of the eigenvalue spectrum for the Hessian matrix, which describes the second order properties of the cost function in the space of coupling coefficients. The form of the eigenvalue distribution suggests new techniques for accelerating the learning process, and provides a theoretical justification for the choice of centered versus biased state variables.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sliding Mode Control Scheme

Absrrucr In this paper, a new fuzzy sliding mode control scheme is proposed for second-order linear timevarying systems in order to obtain faster error convergence and desired error dynamics. It is well known that a second-order linear time-varying system can be used to model higher order linear time invariant systems piece-wisely. Therefore, it is necessary to do deep investigation for the sta...

متن کامل

Development of dissimilar GTA 4130/201 SS weld joint and investigation on the effect of filler metals in order to obtain improved mechanical properties and microstructural features

In this research, gas tungsten arc welding of dissimilar joint between 4130 low alloy steel and AISI 201 austenitic stainless steel was investigated. Four filler metals i. e. ERNiCr-3, ER 309L, ER 308L and ER 80SB2 were used. After welding, microstructural features of various areas and also fracture surfaces were examined using optical microscopy and scanning electron microscopy. Tensile test w...

متن کامل

Development of dissimilar GTA 4130/201 SS weld joint and investigation on the effect of filler metals in order to obtain improved mechanical properties and microstructural features

In this research, gas tungsten arc welding of dissimilar joint between 4130 low alloy steel and AISI 201 austenitic stainless steel was investigated. Four filler metals i. e. ERNiCr-3, ER 309L, ER 308L and ER 80SB2 were used. After welding, microstructural features of various areas and also fracture surfaces were examined using optical microscopy and scanning electron microscopy. Tensile test w...

متن کامل

Stereo for Slanted Surfaces: First Order Disparities and Normal Consistency

Traditional stereo algorithms either explicitly use the frontal parallel plane assumption by only considering position (zero-order) disparity when computing similarity measures of two image windows, or implicitly use it by imposing a smoothness prior bias towards frontal parallel plane solution. However this introduces two types of systematic error for slanted or curved surfaces. The first type...

متن کامل

Extraction Kinetics and Physicochemical Studies of Terminalia catappa L Kernel Oil Utilization Potential

Kinetics and selected variables (temperature, particle size and time) for extraction of Terminalia Catappa L Kernel Oil (TCKO) were investigated using solvent extraction. Kinetic models studied were: parabolic diffusion, power law, hyperbolic, Elovich and pseudo-second-order. In ascending order, the best-fitted models at the optimum temperature and oil yield were Elovich’s model, hyperbolic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1990