Neural network-based optimal control of a DC motor positioning system
نویسندگان
چکیده
This article describes an optimal control algorithm for a DC motor drive operating as a positioning system. The control algorithm is based on combination of artificial neural network and state space method with variable gain. The positioning system operating under proposed algorithm has demonstrated a transient process close to optimal without overshoot. It has been also shown that the control algorithm is robust to the change of the DC motor parameters and the supply voltage disturbances. An experimental setup based on TMS320F243 evaluation module has been designed and built in order to prove the simulation results. The algorithm has been verified by simulation using MATLAB/Simulink and proved by a number of practical experiments.
منابع مشابه
A Neural Network-PSO Based Control for Brushless DC Motors for Minimizing Commutation Torque Ripple
This paper presents the method of reducing torque ripple of brushless DC (BLDC) motor. The commutation torque ripple is reduced by control of the DC link voltage during the commutation time. The magnitude of voltage and commutation time is estimated by a neural network and optimized with an optimization method named particle swarm optimization (PSO) algorithm analysis. The goal of optimizati...
متن کاملNumerical and Neural Network Modeling and control of an Aircraft Propeller
In this paper, parametric and numerical model of the DC motor, connected to aircraft propellers are extracted. This model is required for controlling trust and velocity of the propellers, and consequently, an aircraft. As a result, both of torque and speed of the propeller can be controlled simultaneously which increases the kinematic and kinetic performance of the aircraft. Parametric model of...
متن کاملImprovement of Tracking Accuracy of Positioning Systems with Iron Core Linear DC Motors
Higher productivity requires high-speed motion of machine tool axes. The iron core linear DC motor (LDM) is widely accepted as a viable candidate for high-speed machine tool feed unit. LDM, however, has two inherent disturbance force components, namely cogging and thrust force ripple. These disturbance forces directly affect the tracking accuracy of the feeding system and must be eliminated or ...
متن کاملSolving the local positioning problem using a four-layer artificial neural network
Today, the global positioning systems (GPS) do not work well in buildings and in dense urban areas when there is no lines of sight between the user and their satellites. Hence, the local positioning system (LPS) has been considerably used in recent years. The main purpose of this research is to provide a four-layer artificial neural network based on nonlinear system solver (NLANN) for local pos...
متن کاملIdentification and Adaptive Position and Speed Control of Permanent Magnet DC Motor with Dead Zone Characteristics Based on Support Vector Machines
In this paper a new type of neural networks known as Least Squares Support Vector Machines which gained a huge fame during the recent years for identification of nonlinear systems has been used to identify DC motor with nonlinear dead zone characteristics. The identified system after linearization in each time span, in an online manner provide the model data for Model Predictive Controller of p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IJAAC
دوره 7 شماره
صفحات -
تاریخ انتشار 2013