Angular Transmittance Analysis of a Novel Thermotropic Material
نویسنده
چکیده
This paper uses inverse adding-doubling (IAD) method and Monte Carlo method for the simulation of the spectral angular transmittance of a novel kind of thermotropic material at different temperatures. The results show that the collimated light takes the major part at the beginning of the switching process and the scattered light is negligible. However, the scattered light increased to high above 80% of the total transmitted light with the largest angle distribution of scattered light about 30 degrees as temperature elevated.
منابع مشابه
Transmittance and Reflectance Studies of Thermotropic Material for a Novel Building Integrated Concentrating Photovoltaic (BICPV) ‘Smart Window’ System
A novel Building Integrated Concentrating Photovoltaic (BICPV) Smart Window has been designed and developed as a next generation intelligent window system. In response to climatic conditions, the smart window varies solar light transmission into the building for provision of light and heat with the reflection of light to the photovoltaic (PV) for electricity generation. This unique function is ...
متن کاملNonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties
In the present paper, nonlinear radial and hoop thermoelastic stresses analysis of a disk made of FGMs material is investigated. According to this purpose, finite element method is used. In the present method, second-order one-dimensional element (with three node points) is proposed. The geometrical and stress boundary conditions are defined in the state of non-existence of external pressure an...
متن کاملPlastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
Parallel tubular channel angular pressing (PTCAP) process is a novel recently developed severe plastic deformation technique for fabrication of ultrafine grained (UFG) metallic tubes. This new process consists of two half cycles and is affected by several parameters such as channel angles, deformation ratio and curvature angles. In this paper, the effects of these parameters on the plastic defo...
متن کاملInnovative Application of the RCWA Method for the Ultra-Sensitive Transmittance-Based CD Measurements on Phase-Shift Masks
A novel scatterometry method, based on broadband measurements of reflectance and transmittance spectra is presented. For the first time Rigorous Coupled Wave Analysis (RCWA) algorithm is applied to the analysis of the transmittance spectra for the determination of trench depths, critical dimensions, profiles, film thicknesses, and optical properties (n and k spectra from 190 – 1000 nm) of phase...
متن کاملA new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
Tubular channel angular pressing (TCAP) is a recently invented novel severe plastic deformation technique for producing UFG tubes. Plastic deformation analysis using the finite element method (FEM) was carried out to investigate the effects of trapezoidal channel geometry on strain inhomogeneity index (SII), strain level and required load compared to previously used channel geometries. The resu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 2013 شماره
صفحات -
تاریخ انتشار 2013