Remanent magnetic measurements on perpendicular recording materials with compensation for demagnetizing fields
نویسندگان
چکیده
Existing techniques for characterization of longitudinal recording media using remanence measurements are extended to perpendicular media, in particular to Alumite, and correction for demagnetizing fields is taken into account. It is found that these techniques have limited value because of the sensitivity of the analysis to the correction factor used. Measurement of the recoil lines is investigated as an alternative method of probing the reversal processes.
منابع مشابه
Influence of demagnetization in remanence curves of magnetic thin films
Remanent magnetization curves of perpendicular magnetic thin films are simulated and measured. The simulations are used to investigate the theoretical influence of the strong demagnetizing field present in these films. Conclusions are drawn from this on how remanence curves should be measured and how they should be c0rrecte.d for the demagnetizing influence. The experimental part consists of me...
متن کاملNeutron Depolarisation in Alumite in Remanent States after In-plane and Perpendicular Magnetisation
An alumite film for perpendicular recording is studied by 3-D analysis of a polarised neutron beam transmitted through the film in different directions. Magnetic correlations between the Fe needles are shown to differ after applying an in-plane or a perpendicular magnetic field.
متن کاملمشخصه های آماری ذرات ضبط مغناطیسی
In magnetic recording media, the remanent magnetization loop, Mr(H)has some parameters, which explain the prperties of the medium in view of the storage density and signal-to-noise ratio. It is necessary to find the mechanism of Mr variations from the statistical characteristics of the system. We have prepared samples of single-domain ascicolar iron particles with 0.3 length, and the oriented...
متن کاملA Simple Technique for Hystereris Measurements at High Fields : Application to Magnetic Films in Perpendicular Direction
This paper describes a measurement technique of the hysteresis loop of thin samples along the perpendicular direction, which generally nekds high applied fields (1200 to 1600 kA/m typically) and then "heavy" equipments. The technique is based on burst modes to feed the magnetizing coil, at the mains frequency, which allows us to drastically overload the winding. Digital acquisition and processi...
متن کاملMagnetic Anisotropy: Measurements with a Vector Vibrating Sample Magnetometer
Introduction Anisotropy is a basic property of magnetic materials. The magnetization tends to lie in certain preferred directions, and the energy of the ferromagnet includes an anisotropy term Ea(θ,φ) where the angular coordinates θ,φ define the direction of magnetization. The anisotropy can be intrinsic, related to atomic scale interactions which define easy directions in the crystal (magnetoc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999