An FPGA Digital Radio Utilizing Off-the-shelf Boards and Portable VHDL
نویسندگان
چکیده
This paper explores the state of the art in FPGA based software radio, and demonstrates the concepts in an example design. The trend in software radios is moving toward an all-digital design within a single chip. Most elements of a digital radio can now be implemented within a DSP or an FPGA. Many vendors provide intellectual property cores, which make up the building blocks of a software radio, but these cores are usually not portable from one vendor to another. This paper presents an example design for a digital radio. An off-the-shelf high-speed analog to digital converter board and a generalpurpose FPGA board are used to implement a working radio using portable VHDL based source code and cores.
منابع مشابه
Design and Implementation of Fpga Based Software Defined Radio Using Simulink Hdl Coder
This paper presents the design procedure and implementation results of a proposed software defined radio (SDR) using Altera Cyclone II family board. The implementation uses Matlab/Simulink, Embedded Matlab blocks, and Cyclone II development and educational board. The design has first implemented in Matlab/Simulink environment. It is then converted to VHDL level using Simulink HDL coder. The des...
متن کاملDevelopment of an FPGA-Based Two-Transform Pulse Compressor Mr. Skip
Recent advances in Field Programmable Gate Array (FPGA) technologies have resulted in high gate count and high performance FPGA parts which offer a cost-effective and short development cycle solution for computation intensive signal processor applications. These parts provide an attractive middle ground between Commercial Off-the-Shelf (COTS) boards employing Digital Signal Processor (DSP) chip...
متن کاملDigital Radio High Performance Digital Down - Converters for FPGAs 48 Virtex FPGAs surpass off - the - shelf ASSPs in design flexibility and system integration
متن کامل
An All Digital Qam Modulator with Radio Frequency Output
A software defined radio (SDR) terminal promotes programmable realizations of the physical layer functionalities. A lot of research work has been done in applying digital signal processors (DSP) and field programmable gate arrays (FPGA) to implement the baseband functionalities of the physical layer. In this paper, the programmable solutions are extended to the radio frequency (RF) band for the...
متن کاملFPGA Implementation of a Hammerstein Based Digital Predistorter for Linearizing RF Power Amplifiers with Memory Effects
Power amplifiers (PAs) are inherently nonlinear elements and digital predistortion is a highly cost-effective approach to linearize them. Although most existing architectures assume that the PA has a memoryless nonlinearity, memory effects of the PAs in many applications ,such as wideband code-division multiple access (WCDMA) or orthogonal frequency-division multiplexing (OFDM), can no longer b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004