Study on the Particle Removal Efficiency of Multi Inner Stage Cyclone by CFD Simulation
نویسندگان
چکیده
A new multi inner stage (MIS) cyclone was designed to remove the acidic gas and fine particles produced from electronic industry. To characterize gas flow in MIS cyclone, pressure and velocity distribution were calculated by means of CFD program. Also, the flow locus of fine particles and particle removal efficiency were analyzed by Lagrangian method. When outlet pressure condition was –100mmAq, the efficiency was the best in this study. Keywords—Cyclone, SiO2 particle, Particle removal efficiency, CFD simulation
منابع مشابه
بررسی نقش فاکتورهای آئرودینامیکی - هندسی سیکلون در حدف ذرات
Background and aims: Extensive industrial and production activities are one of the major sources of dust. In many cases, cyclones are used as the control measure. The removal efficiency of dust in cyclones depends on different factors. Some of these factors are, the design parameters, e.g. cyclone diameter, particle density, operating temperature and fluid physical properties, density of gas ...
متن کاملCFD Study and Energy Optimization of Industrial Double-Cyclone in HDPE Drying Process
In this paper, a double-cyclone is used as a gas-solid separator in the fluid bed-drying process to prepare dry HDPE powder from a wet feed of 56000 kg/hr. The quality of dry HDPE depends mainly on particles behavior and flow pattern in the dryer which affect the double-cyclones as an effective equipment in this process. Controlling of the inlet carrier gas causes excellent flow pattern, desire...
متن کاملParticle Size Effects on Hydro-Cyclone Performance
The hydrocyclone has a very important roll in industrial separation. The consideration of its behavior is very important for design. In this investigation, behavior of water flow and particles trajectory inside a hydrocyclone has been considered by means of numerical and experimental methods, and results have been compared together. To have a numerical simulation, a CFD software was used, and f...
متن کاملInvestigation of Separator Cyclone Performance Using CFD Simulation: A Case Study of Cement Industry Cyclone
This paper tends to investigate the performance of a separator cyclone used in cement industries in Iran. This investigation was performed using CFD modeling, which is validated by other valid studies. Separator cyclone performance includes of two important parameters as pressure drop and collection ratio. In this presented study, the pressure drop has been considered to assess the performance ...
متن کاملSimulation of Gas-solid Flow and Design Modifications of Cement Plant Cyclones
The paper presents Design development of cement industry cyclone based on CFD along with pilot plant trials. Based on simulation of laboratory scale cyclone as expressed in literature and in-house pilot plant experiments, Reynolds stress model has been found to predict the turbulent flow field, pressure drop and particle collection efficiency closely as compared to other standard turbulence mod...
متن کامل