Evaluation of the digital image correlation method for the measurement of vibration mode shapes
نویسندگان
چکیده
منابع مشابه
Displacement monitoring of a Long-Span Arch Railway Bridge using Digital Image Correlation (DIC)
There is an escalating demand for condition monitoring enhancement of transport infrastructures worldwide. Bridges are of vital importance in transportation infrastructure and need such monitoring. In this research, a non-contact vision-based technique called Digital Image Correlation (DIC) was used to calculate the bridge displacements. A high frame rate camera with 4K capability was used for ...
متن کاملProcessing Digital Image for Measurement of Crack Dimensions in Concrete
The elements of the concrete structure are most frequently affected by cracking. Crack detection is essential to ensure safety and performance during its service life. Cracks do not have a regular shape, in order to achieve the exact dimensions of the crack; the general mathematical formulae are by no means applicable. The authors have proposed a new method which aims to measure the crack dimen...
متن کاملEstimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle
This paper reports on the analysis of the signals sent by accelerometers fixed on the axles of a vehicle which passes over a bridge. The length of the bridge is divided into some parts and the transmissibility measurement is applied to the signals recorded by two following instrumented axles. As the transmissibility procedure is performed on the divided signals, the method is called Short Time ...
متن کاملA Semi-Analytical Solution for Free Vibration and Modal Stress Analyses of Circular Plates Resting on Two-Parameter Elastic Foundations
In the present research, free vibration and modal stress analyses of thin circular plates with arbitrary edge conditions, resting on two-parameter elastic foundations are investigated. Both Pasternak and Winkler parameters are adopted to model the elastic foundation. The differential transform method (DTM) is used to solve the eigenvalue equation yielding the natural frequencies and mode shape...
متن کاملAeolian Vibrations of Transmission Line Conductors with More than One Damper
To reduce the damages of aeolian vibration of conductors to the power transmission networks, the most common method is installation of Stock-bridge dampers. Estimation of the damper’s dissipated energy is an important factor in determining the number and location of installation of these types of vibration absorbers. This estimation is strongly dependent upon the assumed mode shape of the condu...
متن کامل